Cart (0)
Events for the Month of September, 2025
| << Previous Month | Today | Next Month >> | ||||
|
Category
|
||||||
| Sunday | Monday | Tuesday | Wednesday | Thursday | Friday | Saturday |
|---|---|---|---|---|---|---|
|
1
Application for Short Term Intensive Training (STIT) Funding
You may apply for funding in an approved program from 07/01/2025 - 06/30/2026
12:00am - 12:00am
970 Seats remaining
Application for Utah Works Funding
You may apply for funding in an approved program from 07/01/2025 - 06/30/2026
12:00am - 12:00am
996 Seats remaining
Application: Strategic Workforce Initiative (SWI) Funding
You may apply for funding in an approved program from 07/01/2025 - 06/30/2026
12:00am - 12:00am
996 Seats remaining
Applied Emissions
Course is self-paced and 100% online. You can access content as soon as you are registered. The required 24 hours of training must be completed by Sept 30, 2025.
08:00am - 08:01am
Online
500 Seats remaining
|
2
Creative Problem Solving-Personal/Professional
Course is fully Online from 09/02/2025 to 10/06/2025. No scheduled meetings. Check for assignments' dates in Canvas.
12:00am - 11:59pm
Online
25 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
13 Seats remaining
Autodesk Revit Comprehensive
Class meets in-person every Tuesday and Thursday, starting 8/26/25 and ending 10/16/25. Access to Canvas begins 8/19/25.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
14 Seats remaining
Elementary Methods of Teaching Literacy #1
Course is Hybrid (Online + Webinar). The webinar meetings are every Tuesday from 09/02/2025 to 09/30/2025, from 5:30pm to 8:30pm. You will have until October 6th, 2025 to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
25 Seats remaining
Basic Manufacturing Skills
Class will run from 8/12/25 through 9/30/25 (skip 9/16) in person on Tuesday evenings from 6:00 pm to 9:00 pm for 7 weeks at the Miller Campus.
06:00pm - 09:00pm
Miller Campus - MPDC, 114
6 Seats remaining
Math for Lineworker Pre-Apprenticeship
Classes run August 14 to October 2, 2025, and are held Tuesday and Thursday from 6 to 9PM on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
22 Seats remaining
|
3
Methods of Teaching Secondary Special Education Mathematics
Course is hybrid format (Online + Webinar). Meetings are scheduled every Wednesday from September 03rd to October 14th, 2025 from 4:30pm to 7:30 pm. Check for assignment dates in Canvas.
04:30pm - 07:30pm
Online
30 Seats remaining
Advanced SolidWorks Parametric Modeling
Class meets in-person every Monday and Wednesday evening from 5:30pm - 8:30pm, starting 8/25/25 and ending 10/6/25. Access to Canvas begins 8/18/25. No class 9/1 in observance of Labor Day.
05:30pm - 08:30pm
Miller Campus - MFEC, 229
9 Seats remaining
AutoCAD Fundamentals
This course meets in-person every Monday and Wednesday, starting on 8/25/25 and ending 10/20/25. Access to Canvas starts 8/18/25. No class on 9/1/25 (Labor Day).
05:30pm - 08:30pm
Miller Campus - MFEC, 208
12 Seats remaining
Intermediate Excel
Class will meet in-person on Monday and Wednesday evenings from 5:30 pm to 8:30 pm on Miller Campus in the Miller Professional Development Center, room 114 (MPDC 114). The course starts 9/3/25. On 9/24 there will be an optional review for the exam. The optional Microsoft Excel Assoicate Exam will be proctored on 9/29/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
17 Seats remaining
Orientation to Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/13/2025 to 10/06/2025 , and are held Monday and Wednesday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A. There will be no class on Monday September 1, 2025 in honor of the Labor Day Holiday.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
23 Seats remaining
|
4
Introduction to Quality Systems
Class will run from 8/7/25 through 9/18/25 100% online for 7 weeks. Your instructor will give you instructions through Canvas regarding participation expectations, course logistics, and classroom management.
12:00am - 12:00am
Online
6 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
13 Seats remaining
Autodesk Revit Comprehensive
Class meets in-person every Tuesday and Thursday, starting 8/26/25 and ending 10/16/25. Access to Canvas begins 8/19/25.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
14 Seats remaining
Elementary Methods of Teaching Mathematics
Course is Hybrid (Online + Webinar). The webinar meetings are every Thursday from 09/04/2025 to 10/16/2025, from 5:30pm to 8:30pm. You will have until October 22th to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
24 Seats remaining
Math for Lineworker Pre-Apprenticeship
Classes run August 14 to October 2, 2025, and are held Tuesday and Thursday from 6 to 9PM on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
22 Seats remaining
|
5
Lineworker 3
This is the 3rd Lineworker lab course. This is a Hybrid Course with online and in-person lab work. Canvas access is available June 27, 2025, through September 5, 2025. Lab work will be 7am to 5:30pm on Fridays beginning July 11, 2025, through September 5, 2025, at either SLCC Miller Pole Yard, MCPC-123, or pre-determined industry partner locations. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
07:00am - 05:30pm
Miller Campus - MCPC, 123
24 Seats remaining
|
6
|
|
|
7
|
8
Advanced SolidWorks Parametric Modeling
Class meets in-person every Monday and Wednesday evening from 5:30pm - 8:30pm, starting 8/25/25 and ending 10/6/25. Access to Canvas begins 8/18/25. No class 9/1 in observance of Labor Day.
05:30pm - 08:30pm
Miller Campus - MFEC, 229
9 Seats remaining
AutoCAD Fundamentals
This course meets in-person every Monday and Wednesday, starting on 8/25/25 and ending 10/20/25. Access to Canvas starts 8/18/25. No class on 9/1/25 (Labor Day).
05:30pm - 08:30pm
Miller Campus - MFEC, 208
12 Seats remaining
Intermediate Excel
Class will meet in-person on Monday and Wednesday evenings from 5:30 pm to 8:30 pm on Miller Campus in the Miller Professional Development Center, room 114 (MPDC 114). The course starts 9/3/25. On 9/24 there will be an optional review for the exam. The optional Microsoft Excel Assoicate Exam will be proctored on 9/29/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
17 Seats remaining
Orientation to Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/13/2025 to 10/06/2025 , and are held Monday and Wednesday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A. There will be no class on Monday September 1, 2025 in honor of the Labor Day Holiday.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
23 Seats remaining
|
9
Elementary Methods of Teaching Health
Course is fully Online from 09/09/2025 to 10/13/2025. No meetings scheduled. Check for assignments' dates in Canvas.
12:00am - 11:59pm
Online
25 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
13 Seats remaining
Autodesk Revit Comprehensive
Class meets in-person every Tuesday and Thursday, starting 8/26/25 and ending 10/16/25. Access to Canvas begins 8/19/25.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
14 Seats remaining
Elementary Methods of Teaching Fine Arts
Course is fully Online from 09/09/2025 to 10/07/2025. Webinar meetings scheduled every Tuesday from 5:30pm to 7:30pm. Check for assignments' dates in Canvas.
05:30pm - 07:30pm
Online
25 Seats remaining
Elementary Methods of Teaching Literacy #1
Course is Hybrid (Online + Webinar). The webinar meetings are every Tuesday from 09/02/2025 to 09/30/2025, from 5:30pm to 8:30pm. You will have until October 6th, 2025 to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
25 Seats remaining
Basic Manufacturing Skills
Class will run from 8/12/25 through 9/30/25 (skip 9/16) in person on Tuesday evenings from 6:00 pm to 9:00 pm for 7 weeks at the Miller Campus.
06:00pm - 09:00pm
Miller Campus - MPDC, 114
6 Seats remaining
Math for Lineworker Pre-Apprenticeship
Classes run August 14 to October 2, 2025, and are held Tuesday and Thursday from 6 to 9PM on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
22 Seats remaining
|
10
Methods of Teaching Secondary Special Education Mathematics
Course is hybrid format (Online + Webinar). Meetings are scheduled every Wednesday from September 03rd to October 14th, 2025 from 4:30pm to 7:30 pm. Check for assignment dates in Canvas.
04:30pm - 07:30pm
Online
30 Seats remaining
Advanced SolidWorks Parametric Modeling
Class meets in-person every Monday and Wednesday evening from 5:30pm - 8:30pm, starting 8/25/25 and ending 10/6/25. Access to Canvas begins 8/18/25. No class 9/1 in observance of Labor Day.
05:30pm - 08:30pm
Miller Campus - MFEC, 229
9 Seats remaining
AutoCAD Fundamentals
This course meets in-person every Monday and Wednesday, starting on 8/25/25 and ending 10/20/25. Access to Canvas starts 8/18/25. No class on 9/1/25 (Labor Day).
05:30pm - 08:30pm
Miller Campus - MFEC, 208
12 Seats remaining
Intermediate Excel
Class will meet in-person on Monday and Wednesday evenings from 5:30 pm to 8:30 pm on Miller Campus in the Miller Professional Development Center, room 114 (MPDC 114). The course starts 9/3/25. On 9/24 there will be an optional review for the exam. The optional Microsoft Excel Assoicate Exam will be proctored on 9/29/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
17 Seats remaining
Orientation to Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/13/2025 to 10/06/2025 , and are held Monday and Wednesday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A. There will be no class on Monday September 1, 2025 in honor of the Labor Day Holiday.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
23 Seats remaining
|
11
Introduction to Quality Systems
Class will run from 8/7/25 through 9/18/25 100% online for 7 weeks. Your instructor will give you instructions through Canvas regarding participation expectations, course logistics, and classroom management.
12:00am - 12:00am
Online
6 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
13 Seats remaining
Autodesk Revit Comprehensive
Class meets in-person every Tuesday and Thursday, starting 8/26/25 and ending 10/16/25. Access to Canvas begins 8/19/25.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
14 Seats remaining
Elementary Methods of Teaching Mathematics
Course is Hybrid (Online + Webinar). The webinar meetings are every Thursday from 09/04/2025 to 10/16/2025, from 5:30pm to 8:30pm. You will have until October 22th to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
24 Seats remaining
Math for Lineworker Pre-Apprenticeship
Classes run August 14 to October 2, 2025, and are held Tuesday and Thursday from 6 to 9PM on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
22 Seats remaining
|
12
Lineworker 4
This is the 4th and final Lineworker lab course. This is a Hybrid Course with online and in-person lab work. Canvas access is available September 5, 2025, through October 31, 2025. Lab work will be 7am to 5:30pm on Fridays beginning September 12, 2025, through October 31, 2025, at either SLCC Miller Pole Yard, MCPC-123, or pre-determined industry partner locations. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
07:00am - 05:30pm
Miller Campus - MCPC, 123
25 Seats remaining
Meter Apprenticeship 4B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
25 Seats remaining
|
13
UHP Heavy-Duty Safety Inspection
Class is scheduled for September 13 & 20 from 8:00 to 5:00 PM on the Westpointe Campus, 1060 N Flyer Way, Salt Lake City, UT 84116. Class will be held in the Westpointe Workforce Training & Education Center (WWTE) building, Room 159. The entrance is on the north side of the building.
08:00am - 05:00pm
Westpointe Center - WWTE, 159
22 Seats remaining
|
|
14
|
15
Advanced SolidWorks Parametric Modeling
Class meets in-person every Monday and Wednesday evening from 5:30pm - 8:30pm, starting 8/25/25 and ending 10/6/25. Access to Canvas begins 8/18/25. No class 9/1 in observance of Labor Day.
05:30pm - 08:30pm
Miller Campus - MFEC, 229
9 Seats remaining
AutoCAD Fundamentals
This course meets in-person every Monday and Wednesday, starting on 8/25/25 and ending 10/20/25. Access to Canvas starts 8/18/25. No class on 9/1/25 (Labor Day).
05:30pm - 08:30pm
Miller Campus - MFEC, 208
12 Seats remaining
Intermediate Excel
Class will meet in-person on Monday and Wednesday evenings from 5:30 pm to 8:30 pm on Miller Campus in the Miller Professional Development Center, room 114 (MPDC 114). The course starts 9/3/25. On 9/24 there will be an optional review for the exam. The optional Microsoft Excel Assoicate Exam will be proctored on 9/29/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
17 Seats remaining
Orientation to Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/13/2025 to 10/06/2025 , and are held Monday and Wednesday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A. There will be no class on Monday September 1, 2025 in honor of the Labor Day Holiday.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
23 Seats remaining
|
16
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
13 Seats remaining
Autodesk Revit Comprehensive
Class meets in-person every Tuesday and Thursday, starting 8/26/25 and ending 10/16/25. Access to Canvas begins 8/19/25.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
14 Seats remaining
Elementary Methods of Teaching Fine Arts
Course is fully Online from 09/09/2025 to 10/07/2025. Webinar meetings scheduled every Tuesday from 5:30pm to 7:30pm. Check for assignments' dates in Canvas.
05:30pm - 07:30pm
Online
25 Seats remaining
Elementary Methods of Teaching Literacy #1
Course is Hybrid (Online + Webinar). The webinar meetings are every Tuesday from 09/02/2025 to 09/30/2025, from 5:30pm to 8:30pm. You will have until October 6th, 2025 to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
25 Seats remaining
Math for Lineworker Pre-Apprenticeship
Classes run August 14 to October 2, 2025, and are held Tuesday and Thursday from 6 to 9PM on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
22 Seats remaining
|
17
Methods of Teaching Secondary Special Education Mathematics
Course is hybrid format (Online + Webinar). Meetings are scheduled every Wednesday from September 03rd to October 14th, 2025 from 4:30pm to 7:30 pm. Check for assignment dates in Canvas.
04:30pm - 07:30pm
Online
30 Seats remaining
Advanced SolidWorks Parametric Modeling
Class meets in-person every Monday and Wednesday evening from 5:30pm - 8:30pm, starting 8/25/25 and ending 10/6/25. Access to Canvas begins 8/18/25. No class 9/1 in observance of Labor Day.
05:30pm - 08:30pm
Miller Campus - MFEC, 229
9 Seats remaining
AutoCAD Fundamentals
This course meets in-person every Monday and Wednesday, starting on 8/25/25 and ending 10/20/25. Access to Canvas starts 8/18/25. No class on 9/1/25 (Labor Day).
05:30pm - 08:30pm
Miller Campus - MFEC, 208
12 Seats remaining
Intermediate Excel
Class will meet in-person on Monday and Wednesday evenings from 5:30 pm to 8:30 pm on Miller Campus in the Miller Professional Development Center, room 114 (MPDC 114). The course starts 9/3/25. On 9/24 there will be an optional review for the exam. The optional Microsoft Excel Assoicate Exam will be proctored on 9/29/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
17 Seats remaining
Introduction to Medical Device Industry
Class will run from 09/17/25 through 10/22/25 for 6 weeks in person on Wednesday evenings from 6:00 pm to 9:00 pm at the Miller Campus, classroom TBD.
06:00pm - 09:00pm
Miller Campus - MCPC, 110
9 Seats remaining
Orientation to Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/13/2025 to 10/06/2025 , and are held Monday and Wednesday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A. There will be no class on Monday September 1, 2025 in honor of the Labor Day Holiday.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
23 Seats remaining
|
18
Introduction to Quality Systems
Class will run from 8/7/25 through 9/18/25 100% online for 7 weeks. Your instructor will give you instructions through Canvas regarding participation expectations, course logistics, and classroom management.
12:00am - 12:00am
Online
6 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
13 Seats remaining
Autodesk Revit Comprehensive
Class meets in-person every Tuesday and Thursday, starting 8/26/25 and ending 10/16/25. Access to Canvas begins 8/19/25.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
14 Seats remaining
Elementary Methods of Teaching Mathematics
Course is Hybrid (Online + Webinar). The webinar meetings are every Thursday from 09/04/2025 to 10/16/2025, from 5:30pm to 8:30pm. You will have until October 22th to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
24 Seats remaining
Math for Lineworker Pre-Apprenticeship
Classes run August 14 to October 2, 2025, and are held Tuesday and Thursday from 6 to 9PM on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
22 Seats remaining
|
19
Lineworker 4
This is the 4th and final Lineworker lab course. This is a Hybrid Course with online and in-person lab work. Canvas access is available September 5, 2025, through October 31, 2025. Lab work will be 7am to 5:30pm on Fridays beginning September 12, 2025, through October 31, 2025, at either SLCC Miller Pole Yard, MCPC-123, or pre-determined industry partner locations. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
07:00am - 05:30pm
Miller Campus - MCPC, 123
25 Seats remaining
|
20
UHP Heavy-Duty Safety Inspection
Class is scheduled for September 13 & 20 from 8:00 to 5:00 PM on the Westpointe Campus, 1060 N Flyer Way, Salt Lake City, UT 84116. Class will be held in the Westpointe Workforce Training & Education Center (WWTE) building, Room 159. The entrance is on the north side of the building.
08:00am - 05:00pm
Westpointe Center - WWTE, 159
22 Seats remaining
|
|
21
|
22
Advanced SolidWorks Parametric Modeling
Class meets in-person every Monday and Wednesday evening from 5:30pm - 8:30pm, starting 8/25/25 and ending 10/6/25. Access to Canvas begins 8/18/25. No class 9/1 in observance of Labor Day.
05:30pm - 08:30pm
Miller Campus - MFEC, 229
9 Seats remaining
AutoCAD Fundamentals
This course meets in-person every Monday and Wednesday, starting on 8/25/25 and ending 10/20/25. Access to Canvas starts 8/18/25. No class on 9/1/25 (Labor Day).
05:30pm - 08:30pm
Miller Campus - MFEC, 208
12 Seats remaining
Intermediate Excel
Class will meet in-person on Monday and Wednesday evenings from 5:30 pm to 8:30 pm on Miller Campus in the Miller Professional Development Center, room 114 (MPDC 114). The course starts 9/3/25. On 9/24 there will be an optional review for the exam. The optional Microsoft Excel Assoicate Exam will be proctored on 9/29/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
17 Seats remaining
Orientation to Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/13/2025 to 10/06/2025 , and are held Monday and Wednesday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A. There will be no class on Monday September 1, 2025 in honor of the Labor Day Holiday.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
23 Seats remaining
|
23
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
13 Seats remaining
Autodesk Revit Comprehensive
Class meets in-person every Tuesday and Thursday, starting 8/26/25 and ending 10/16/25. Access to Canvas begins 8/19/25.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
14 Seats remaining
Elementary Methods of Teaching Fine Arts
Course is fully Online from 09/09/2025 to 10/07/2025. Webinar meetings scheduled every Tuesday from 5:30pm to 7:30pm. Check for assignments' dates in Canvas.
05:30pm - 07:30pm
Online
25 Seats remaining
Elementary Methods of Teaching Literacy #1
Course is Hybrid (Online + Webinar). The webinar meetings are every Tuesday from 09/02/2025 to 09/30/2025, from 5:30pm to 8:30pm. You will have until October 6th, 2025 to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
25 Seats remaining
Basic Manufacturing Skills
Class will run from 8/12/25 through 9/30/25 (skip 9/16) in person on Tuesday evenings from 6:00 pm to 9:00 pm for 7 weeks at the Miller Campus.
06:00pm - 09:00pm
Miller Campus - MPDC, 114
6 Seats remaining
Math for Lineworker Pre-Apprenticeship
Classes run August 14 to October 2, 2025, and are held Tuesday and Thursday from 6 to 9PM on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
22 Seats remaining
|
24
Certified Registered Pool Operator
Live 2-Day: Course Dates: 9/24/25 thru 9/25/25; This course is taught on Wednesday and Thursday, two full days from 9:00 am to 4:00 pm each day. Click on "Full Schedule". You DO NOT need to login to Canvas account or access www.slcc.edu for any reason. Contact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
09:00am - 04:00pm
Miller Campus - MFEC, 206
24 Seats remaining
Certified Registered Pool Operator
Webinar 2-Day: Course Dates: 9/24/25 to 9/25/25; Click on "Full Schedule". This course is taught on Wednesday and Thursday from 9:00 am to 4:00 pm, two full days via LIVE webinar. We will send you a direct link to the webinar via email. You DO NOT need to login to Canvas or access www.slcc.edu for any reason.
09:00am - 04:00pm
Online
10 Seats remaining
Methods of Teaching Secondary Special Education Mathematics
Course is hybrid format (Online + Webinar). Meetings are scheduled every Wednesday from September 03rd to October 14th, 2025 from 4:30pm to 7:30 pm. Check for assignment dates in Canvas.
04:30pm - 07:30pm
Online
30 Seats remaining
Advanced SolidWorks Parametric Modeling
Class meets in-person every Monday and Wednesday evening from 5:30pm - 8:30pm, starting 8/25/25 and ending 10/6/25. Access to Canvas begins 8/18/25. No class 9/1 in observance of Labor Day.
05:30pm - 08:30pm
Miller Campus - MFEC, 229
9 Seats remaining
AutoCAD Fundamentals
This course meets in-person every Monday and Wednesday, starting on 8/25/25 and ending 10/20/25. Access to Canvas starts 8/18/25. No class on 9/1/25 (Labor Day).
05:30pm - 08:30pm
Miller Campus - MFEC, 208
12 Seats remaining
Intermediate Excel
Class will meet in-person on Monday and Wednesday evenings from 5:30 pm to 8:30 pm on Miller Campus in the Miller Professional Development Center, room 114 (MPDC 114). The course starts 9/3/25. On 9/24 there will be an optional review for the exam. The optional Microsoft Excel Assoicate Exam will be proctored on 9/29/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
17 Seats remaining
Introduction to Medical Device Industry
Class will run from 09/17/25 through 10/22/25 for 6 weeks in person on Wednesday evenings from 6:00 pm to 9:00 pm at the Miller Campus, classroom TBD.
06:00pm - 09:00pm
Miller Campus - MCPC, 110
9 Seats remaining
Orientation to Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/13/2025 to 10/06/2025 , and are held Monday and Wednesday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A. There will be no class on Monday September 1, 2025 in honor of the Labor Day Holiday.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
23 Seats remaining
|
25
Certified Registered Pool Operator
Live 2-Day: Course Dates: 9/24/25 thru 9/25/25; This course is taught on Wednesday and Thursday, two full days from 9:00 am to 4:00 pm each day. Click on "Full Schedule". You DO NOT need to login to Canvas account or access www.slcc.edu for any reason. Contact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
09:00am - 04:00pm
Miller Campus - MFEC, 206
24 Seats remaining
Certified Registered Pool Operator
Webinar 2-Day: Course Dates: 9/24/25 to 9/25/25; Click on "Full Schedule". This course is taught on Wednesday and Thursday from 9:00 am to 4:00 pm, two full days via LIVE webinar. We will send you a direct link to the webinar via email. You DO NOT need to login to Canvas or access www.slcc.edu for any reason.
09:00am - 04:00pm
Online
10 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
13 Seats remaining
Autodesk Revit Comprehensive
Class meets in-person every Tuesday and Thursday, starting 8/26/25 and ending 10/16/25. Access to Canvas begins 8/19/25.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
14 Seats remaining
Elementary Methods of Teaching Mathematics
Course is Hybrid (Online + Webinar). The webinar meetings are every Thursday from 09/04/2025 to 10/16/2025, from 5:30pm to 8:30pm. You will have until October 22th to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
24 Seats remaining
Math for Lineworker Pre-Apprenticeship
Classes run August 14 to October 2, 2025, and are held Tuesday and Thursday from 6 to 9PM on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
22 Seats remaining
|
26
Lineworker 4
This is the 4th and final Lineworker lab course. This is a Hybrid Course with online and in-person lab work. Canvas access is available September 5, 2025, through October 31, 2025. Lab work will be 7am to 5:30pm on Fridays beginning September 12, 2025, through October 31, 2025, at either SLCC Miller Pole Yard, MCPC-123, or pre-determined industry partner locations. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
07:00am - 05:30pm
Miller Campus - MCPC, 123
25 Seats remaining
Meter Apprenticeship 4B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
25 Seats remaining
|
27
|
|
28
|
29
Advanced SolidWorks Parametric Modeling
Class meets in-person every Monday and Wednesday evening from 5:30pm - 8:30pm, starting 8/25/25 and ending 10/6/25. Access to Canvas begins 8/18/25. No class 9/1 in observance of Labor Day.
05:30pm - 08:30pm
Miller Campus - MFEC, 229
9 Seats remaining
AutoCAD Fundamentals
This course meets in-person every Monday and Wednesday, starting on 8/25/25 and ending 10/20/25. Access to Canvas starts 8/18/25. No class on 9/1/25 (Labor Day).
05:30pm - 08:30pm
Miller Campus - MFEC, 208
12 Seats remaining
Intermediate Excel
Class will meet in-person on Monday and Wednesday evenings from 5:30 pm to 8:30 pm on Miller Campus in the Miller Professional Development Center, room 114 (MPDC 114). The course starts 9/3/25. On 9/24 there will be an optional review for the exam. The optional Microsoft Excel Assoicate Exam will be proctored on 9/29/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
17 Seats remaining
Orientation to Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/13/2025 to 10/06/2025 , and are held Monday and Wednesday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A. There will be no class on Monday September 1, 2025 in honor of the Labor Day Holiday.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
23 Seats remaining
|
30
Genealogy-Tracing Immigrant Origins
Course Dates: 8/12/25 through 9/30/25; The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
10 Seats remaining
Genealogy-Writing Life Stories
Course Dates: 8/12/25 through 9/30/25; The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
9 Seats remaining
Genetic Genealogy
Course Dates: 8/12/25 through 9/30/25; The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
9 Seats remaining
Intro to High-Tech Genealogy
Course Dates: 8/12/25 through 9/30/25; The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
10 Seats remaining
U.S. Genealogy Research I
Course Dates: 8/12/25 through 9/30/25; The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
9 Seats remaining
Applied Emissions
Course is self-paced and 100% online. You can access content as soon as you are registered. The required 24 hours of training must be completed by Sept 30, 2025.
08:00am - 08:01am
Online
500 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
13 Seats remaining
Autodesk Revit Comprehensive
Class meets in-person every Tuesday and Thursday, starting 8/26/25 and ending 10/16/25. Access to Canvas begins 8/19/25.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
14 Seats remaining
Elementary Methods of Teaching Fine Arts
Course is fully Online from 09/09/2025 to 10/07/2025. Webinar meetings scheduled every Tuesday from 5:30pm to 7:30pm. Check for assignments' dates in Canvas.
05:30pm - 07:30pm
Online
25 Seats remaining
Elementary Methods of Teaching Literacy #1
Course is Hybrid (Online + Webinar). The webinar meetings are every Tuesday from 09/02/2025 to 09/30/2025, from 5:30pm to 8:30pm. You will have until October 6th, 2025 to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
25 Seats remaining
Basic Manufacturing Skills
Class will run from 8/12/25 through 9/30/25 (skip 9/16) in person on Tuesday evenings from 6:00 pm to 9:00 pm for 7 weeks at the Miller Campus.
06:00pm - 09:00pm
Miller Campus - MPDC, 114
6 Seats remaining
Math for Lineworker Pre-Apprenticeship
Classes run August 14 to October 2, 2025, and are held Tuesday and Thursday from 6 to 9PM on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
22 Seats remaining
|
||||
| << Previous Month | Today | Next Month >> | ||||