Cart (0)
Events for the Month of June, 2026
| << Previous Month | Today | Next Month >> | ||||
|
|
||||||
| Sunday | Monday | Tuesday | Wednesday | Thursday | Friday | Saturday |
|---|---|---|---|---|---|---|
|
1
Alternating Current
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 06/01/2026 must be completed by 06/01/2027
12:00am - 01:00am
Online
Application for Utah Works Funding
You may apply for funding in an approved program from 07/01/2025 - 06/30/2026
12:00am - 12:00am
Application: Strategic Workforce Initiative (SWI) Funding
You may apply for funding in an approved program from 07/01/2025 - 06/30/2026
12:00am - 12:00am
Basic Controls
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 06/01/2026 must be completed by 06/01/2027
12:00am - 01:00am
Online
Complex Controls
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 06/01/2026 must be completed by 06/01/2027
12:00am - 01:00am
Online
Direct Current
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 06/01/2026 must be completed by 06/01/2027
12:00am - 01:00am
Online
Electrical Safety
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 06/01/2026 must be completed by 06/01/2027
12:00am - 01:00am
Online
Filament Winding Composite Technician
This course will be completed at your own pace. Starts 06/01/26 and must be completed by 06/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Instrumentation
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 06/01/2026 must be completed by 06/01/2027
12:00am - 01:00am
Online
Integrated Controls
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 06/01/2026 must be completed by 06/01/2027
12:00am - 01:00am
Online
Motors & VFD Systems
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 06/01/2026 must be completed by 06/01/2027
12:00am - 01:00am
Online
Pre-Preg Composite Technician
This course will be completed at your own pace. Starts 06/01/26 and must be completed by 06/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Wet Layup Composite Technician
This course will be completed at your own pace. Starts 06/01/26 and must be completed by 06/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Applied Emissions
Course is self-paced and 100% online. You can access content as soon as you are registered. The required 24 hours of training must be completed by June 30, 2026.
08:00am - 08:01am
Online
Instructor Institute Online
This session is an online, asynchronous course that will take 8 hours total to complete. To receive the micro credential, you must attend 4 hours of coaching office hours that are offered by Emily Huillet. She will be holding these sessions at 2pm on Thursdays from June 25th through August 13th. If you can't ever make these times, please let Emily know at ehuillet@slcc.edu and she will schedule make up sessions for you. For the other 4 hours, you must complete online training provided on Canvas.
12:00pm - 12:01pm
Online
|
2
|
3
|
4
|
5
|
6
|
|
|
7
|
8
|
9
|
10 TODAY
|
11
|
12
Engaging Adult Learners
This workshop is required to receive the Instructor Training Institute micro credential. If you have to miss, please schedule a makeup session with Maria Griffin. Lunch will be served at each in-person session. Please contact Maria Griffin and Emily Huillet about any food allergies.
08:30am - 12:30pm
Miller Campus - MFEC, 206
|
13
Beginning Riders Taylorsville
Daily, starting on Saturday, 06/13/2026 and Sunday, 06/14/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am-Noon on 6/13/2026.
10:00am - 12:00pm
Miller Campus - MFEC, 107
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 6/13/2026.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
|
|
14
Beginning Riders Taylorsville
Daily, starting on Saturday, 06/13/2026 and Sunday, 06/14/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
|
15
Sheet Metal Assembly
This 48-hour course will run through a 2-week period starting June 15th and end June 26th. M- F from 8am to 12pm.
08:00am - 12:00pm
Westpointe Center - WWTE, 120
|
16
Sheet Metal Assembly
This 48-hour course will run through a 2-week period starting June 15th and end June 26th. M- F from 8am to 12pm.
08:00am - 12:00pm
Westpointe Center - WWTE, 120
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 6/16/2026.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
Introduction to Excel
The course runs from June 16, 2026 to June 25, 2026. Class will meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Miller Campus in the Miller Professional Development Center, room 118 (LHM-MPDC-118).
05:30pm - 08:30pm
Miller Campus - MPDC, 118
Basic Manufacturing Skills
This course is held on campus, in person at the Miller Campus of SLCC, 9750 S 300 W, Sandy, Ut 84070, Room TBD. There are no books or materials required for this course. There is coursework that is accessed online through Canvas at the following link: slcc.edu https://slcc.instructure.com/login/canvasContact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
06:00pm - 09:00pm
Miller Campus - MPDC, 114
|
17
Sheet Metal Assembly
This 48-hour course will run through a 2-week period starting June 15th and end June 26th. M- F from 8am to 12pm.
08:00am - 12:00pm
Westpointe Center - WWTE, 120
Certified Registered Pool Operator
Live 2-Day: Course Dates: 6/17/26 and 6/18/26; This course is taught on Wednesday and Thursday, two full days from 9:00 am to 4:00 pm each day. Click on "Full Schedule". You DO NOT need to login to Canvas account or access www.slcc.edu for any reason. Contact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
09:00am - 04:00pm
Miller Campus - MFEC, 206
Certified Registered Pool Operator
Webinar 2-Day: Course Dates: 6/17/26 to 6/18/26; Click on "Full Schedule". This course is taught on Wednesday and Thursday from 9:00 am to 4:00 pm, two full days via LIVE webinar. We will send you a direct link to the webinar via email. You DO NOT need to login to Canvas or access www.slcc.edu for any reason.
09:00am - 04:00pm
Online
|
18
IPC 610 Certification
This 30 hour class runs from June 17, 2026 through June 23, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
Sheet Metal Assembly
This 48-hour course will run through a 2-week period starting June 15th and end June 26th. M- F from 8am to 12pm.
08:00am - 12:00pm
Westpointe Center - WWTE, 120
Certified Registered Pool Operator
Live 2-Day: Course Dates: 6/17/26 and 6/18/26; This course is taught on Wednesday and Thursday, two full days from 9:00 am to 4:00 pm each day. Click on "Full Schedule". You DO NOT need to login to Canvas account or access www.slcc.edu for any reason. Contact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
09:00am - 04:00pm
Miller Campus - MFEC, 206
Certified Registered Pool Operator
Webinar 2-Day: Course Dates: 6/17/26 to 6/18/26; Click on "Full Schedule". This course is taught on Wednesday and Thursday from 9:00 am to 4:00 pm, two full days via LIVE webinar. We will send you a direct link to the webinar via email. You DO NOT need to login to Canvas or access www.slcc.edu for any reason.
09:00am - 04:00pm
Online
Introduction to Excel
The course runs from June 16, 2026 to June 25, 2026. Class will meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Miller Campus in the Miller Professional Development Center, room 118 (LHM-MPDC-118).
05:30pm - 08:30pm
Miller Campus - MPDC, 118
|
19
IPC 610 Certification
This 30 hour class runs from June 17, 2026 through June 23, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
Beginning Riders Taylorsville
Weekly, starting on Friday, 06/19/2026 and Friday, 06/26/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
Sheet Metal Assembly
This 48-hour course will run through a 2-week period starting June 15th and end June 26th. M- F from 8am to 12pm.
08:00am - 12:00pm
Westpointe Center - WWTE, 120
Assessment and Support
This workshop is required to receive the Instructor Training Institute micro credential. If you have to miss, please schedule a makeup session with Maria Griffin. Lunch will be served at each in-person session. Please contact Maria Griffin and Emily Huillet about any food allergies.
08:30am - 12:30pm
Miller Campus - MFEC, 206
Cultivating an Educator Mindset
This workshop is required to receive the Instructor Training Institute micro credential. If you have to miss, please schedule a makeup session with Maria Griffin. Lunch will be served at each in-person session. Please contact Maria Griffin and Emily Huillet about any food allergies.
08:30am - 12:30pm
Miller Campus - MFEC, 206
|
20
IPC 610 Certification
This 30 hour class runs from June 17, 2026 through June 23, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
Beginning Riders Taylorsville
Daily, starting on Saturday, 06/20/2026 and Sunday, 06/21/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
UHP Heavy-Duty Safety Inspection
Class is scheduled for June 20 & 27 from 8:00 to 5:00 PM on the Westpointe Campus, 1060 N Flyer Way, Salt Lake City, UT 84116. Class will be held in the Westpointe Workforce Training & Education Center (WWTE) building, Room 159. The entrance is on the north side of the building.
08:00am - 05:00pm
Westpointe Center - WWTE, 159
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am-Noon on 6/20/2026.
10:00am - 12:00pm
Miller Campus - MFEC, 107
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 6/20/2026.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
|
|
21
IPC 610 Certification
This 30 hour class runs from June 17, 2026 through June 23, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
Advanced Riders Taylorsville
Sunday, 06/21/2026 from 8:00 a.m. to 3:00 p.m.
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
Beginning Riders Taylorsville
Daily, starting on Saturday, 06/20/2026 and Sunday, 06/21/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
|
22
IPC 610 Certification
This 30 hour class runs from June 17, 2026 through June 23, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
Sheet Metal Assembly
This 48-hour course will run through a 2-week period starting June 15th and end June 26th. M- F from 8am to 12pm.
08:00am - 12:00pm
Westpointe Center - WWTE, 120
Injection Molding Tech I
This 80-hour class will start Monday, June 22 and run until Thursday, July 23rd every Monday through Thursday from 9am to 1pm.
09:00am - 01:00pm
Westpointe Center - WWTE, 109
Principles of Scientific Molding
This 80-hour course will run over a 5-week period, every Monday through Thursday starting June 22nd from 4pm to 8pm. There is a pre-requisite of Injection Molding Level 1 before taking this course.
04:00pm - 08:00pm
Westpointe Center - WWTE, 109
Advanced SolidWorks Parametric Modeling
Class meets in-person in MFEC 229 every Monday and Wednesday from 5:30pm - 8:30pm, starting 6/22/26 and ending 7/29/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 229
QuickBooks Essentials
This course meets in-person in MPDC 114 on Monday evenings beginning on 6/22/26. There will be no class on Monday, July 6. On Monday, 8/10/26 there will be an optional review session from 5:30pm - 8:30pm. The optional QuickBooks Certified User Exam will be proctored in-person on Monday, 8/17/26 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
|
23
Sheet Metal Assembly
This 48-hour course will run through a 2-week period starting June 15th and end June 26th. M- F from 8am to 12pm.
08:00am - 12:00pm
Westpointe Center - WWTE, 120
Injection Molding Tech I
This 80-hour class will start Monday, June 22 and run until Thursday, July 23rd every Monday through Thursday from 9am to 1pm.
09:00am - 01:00pm
Westpointe Center - WWTE, 109
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 6/23/2026.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
Principles of Scientific Molding
This 80-hour course will run over a 5-week period, every Monday through Thursday starting June 22nd from 4pm to 8pm. There is a pre-requisite of Injection Molding Level 1 before taking this course.
04:00pm - 08:00pm
Westpointe Center - WWTE, 109
Introduction to Excel
The course runs from June 16, 2026 to June 25, 2026. Class will meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Miller Campus in the Miller Professional Development Center, room 118 (LHM-MPDC-118).
05:30pm - 08:30pm
Miller Campus - MPDC, 118
Basic Manufacturing Skills
This course is held on campus, in person at the Miller Campus of SLCC, 9750 S 300 W, Sandy, Ut 84070, Room TBD. There are no books or materials required for this course. There is coursework that is accessed online through Canvas at the following link: slcc.edu https://slcc.instructure.com/login/canvasContact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
06:00pm - 09:00pm
Miller Campus - MPDC, 114
|
24
Sheet Metal Assembly
This 48-hour course will run through a 2-week period starting June 15th and end June 26th. M- F from 8am to 12pm.
08:00am - 12:00pm
Westpointe Center - WWTE, 120
Injection Molding Tech I
This 80-hour class will start Monday, June 22 and run until Thursday, July 23rd every Monday through Thursday from 9am to 1pm.
09:00am - 01:00pm
Westpointe Center - WWTE, 109
Principles of Scientific Molding
This 80-hour course will run over a 5-week period, every Monday through Thursday starting June 22nd from 4pm to 8pm. There is a pre-requisite of Injection Molding Level 1 before taking this course.
04:00pm - 08:00pm
Westpointe Center - WWTE, 109
Advanced SolidWorks Parametric Modeling
Class meets in-person in MFEC 229 every Monday and Wednesday from 5:30pm - 8:30pm, starting 6/22/26 and ending 7/29/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 229
|
25
Sheet Metal Assembly
This 48-hour course will run through a 2-week period starting June 15th and end June 26th. M- F from 8am to 12pm.
08:00am - 12:00pm
Westpointe Center - WWTE, 120
Injection Molding Tech I
This 80-hour class will start Monday, June 22 and run until Thursday, July 23rd every Monday through Thursday from 9am to 1pm.
09:00am - 01:00pm
Westpointe Center - WWTE, 109
Principles of Scientific Molding
This 80-hour course will run over a 5-week period, every Monday through Thursday starting June 22nd from 4pm to 8pm. There is a pre-requisite of Injection Molding Level 1 before taking this course.
04:00pm - 08:00pm
Westpointe Center - WWTE, 109
Introduction to Excel
The course runs from June 16, 2026 to June 25, 2026. Class will meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Miller Campus in the Miller Professional Development Center, room 118 (LHM-MPDC-118).
05:30pm - 08:30pm
Miller Campus - MPDC, 118
|
26
Beginning Riders Ogden
Daily, starting on Friday, 06/26/2026 and Saturday, 06/27/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Washington Heights Church
Beginning Riders Taylorsville
Weekly, starting on Friday, 06/19/2026 and Friday, 06/26/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
Sheet Metal Assembly
This 48-hour course will run through a 2-week period starting June 15th and end June 26th. M- F from 8am to 12pm.
08:00am - 12:00pm
Westpointe Center - WWTE, 120
|
27
Beginning Riders Ogden
Daily, starting on Friday, 06/26/2026 and Saturday, 06/27/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Washington Heights Church
Beginning Riders Taylorsville
Daily, starting on Saturday, 06/27/2026 and Sunday, 06/28/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
Experienced Riders Jordan
Saturday 06/27/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Jordan Campus - HTC, Lot J3
UHP Heavy-Duty Safety Inspection
Class is scheduled for June 20 & 27 from 8:00 to 5:00 PM on the Westpointe Campus, 1060 N Flyer Way, Salt Lake City, UT 84116. Class will be held in the Westpointe Workforce Training & Education Center (WWTE) building, Room 159. The entrance is on the north side of the building.
08:00am - 05:00pm
Westpointe Center - WWTE, 159
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am-Noon on 6/27/2026.
10:00am - 12:00pm
Miller Campus - MFEC, 107
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 6/27/2026.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
|
|
28
Beginning Riders Taylorsville
Daily, starting on Saturday, 06/27/2026 and Sunday, 06/28/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
|
29
Professional Responsibility as an Educator
Course is 100% online, no scheduled meetings. Check for assignments dates in Canvas. Class available from 06/29/2026 to 08/02/2026.
12:00am - 11:59pm
Online
Injection Molding Tech I
This 80-hour class will start Monday, June 22 and run until Thursday, July 23rd every Monday through Thursday from 9am to 1pm.
09:00am - 01:00pm
Westpointe Center - WWTE, 109
Principles of Scientific Molding
This 80-hour course will run over a 5-week period, every Monday through Thursday starting June 22nd from 4pm to 8pm. There is a pre-requisite of Injection Molding Level 1 before taking this course.
04:00pm - 08:00pm
Westpointe Center - WWTE, 109
Advanced SolidWorks Parametric Modeling
Class meets in-person in MFEC 229 every Monday and Wednesday from 5:30pm - 8:30pm, starting 6/22/26 and ending 7/29/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 229
Basic Computer Skills I: Using the Computer and Internet
This class meets every Monday from 5:30pm to 8:30pm and every Wednesday from 5:30pm to 7:30pm. The class runs from June 29, 2026 to August 5, 2026. The classroom is located at the Salt Lake Community College Taylorsville Redwood Road campus, Construction Trades (CT) building, Room 018E (TRW-CT-018E).
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018E
QuickBooks Essentials
This course meets in-person in MPDC 114 on Monday evenings beginning on 6/22/26. There will be no class on Monday, July 6. On Monday, 8/10/26 there will be an optional review session from 5:30pm - 8:30pm. The optional QuickBooks Certified User Exam will be proctored in-person on Monday, 8/17/26 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
|
30
Adapted PE
Classes are from June 30th to August 25th, 2026. Fully online coursework in Canvas. Check dates for assignments.
12:00am - 12:00pm
Online
Cultivating Healthy Relationships
Course is from June 30th, 2026 to August 25th, 2026. Available 100% online, no scheduled meetings. Check for assignments dates in Canvas.
12:00am - 12:00pm
Online
Filament Winding Composite Technician
This course will be completed at your own pace. Starts 06/01/26 and must be completed by 06/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Human Development/Sexuality
Classes are fully online from June 30th to August 25th, 2026. Check dates for assignments.
12:00am - 12:00pm
Online
Methods of Teaching PE
Course is 100% online no scheduled meetings. Check for assignment date in Canvas. Classes are available from June 30th to August 25th, 2026.
12:00am - 12:00pm
Online
Nutrition, Safety, & Disease Prevention
Course is 100% online no scheduled meetings. Check for assignment dates in Canvas. Class is available from June 30th to August 25th, 2026.
12:00am - 12:00pm
Online
Pre-Preg Composite Technician
This course will be completed at your own pace. Starts 06/01/26 and must be completed by 06/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Wet Layup Composite Technician
This course will be completed at your own pace. Starts 06/01/26 and must be completed by 06/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Applied Emissions
Course is self-paced and 100% online. You can access content as soon as you are registered. The required 24 hours of training must be completed by June 30, 2026.
08:00am - 08:01am
Online
Basic Computer Skills II: Introduction to Word
The class runs from June 30, 2026 to July 23, 2026 and will meet every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The classroom is located at the Salt Lake Community College Miller campus, Miller Professional Development Center (MPDC) building, Room 118 (Miller-MPDC-118).
09:00am - 12:00pm
Miller Campus - MPDC, 118
Injection Molding Tech I
This 80-hour class will start Monday, June 22 and run until Thursday, July 23rd every Monday through Thursday from 9am to 1pm.
09:00am - 01:00pm
Westpointe Center - WWTE, 109
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 6/30/2026.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
Principles of Scientific Molding
This 80-hour course will run over a 5-week period, every Monday through Thursday starting June 22nd from 4pm to 8pm. There is a pre-requisite of Injection Molding Level 1 before taking this course.
04:00pm - 08:00pm
Westpointe Center - WWTE, 109
Intermediate Excel
The course runs from June 30, 2026 to July 23, 2026. Class will meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Miller Campus in the Miller Free Enterprise Center, room 229 (LHM-MFEC-229).
05:30pm - 08:30pm
Miller Campus - MFEC, 229
Basic Manufacturing Skills
This course is held on campus, in person at the Miller Campus of SLCC, 9750 S 300 W, Sandy, Ut 84070, Room TBD. There are no books or materials required for this course. There is coursework that is accessed online through Canvas at the following link: slcc.edu https://slcc.instructure.com/login/canvasContact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
06:00pm - 09:00pm
Miller Campus - MPDC, 114
|
||||
| << Previous Month | Today | Next Month >> | ||||