Cart (0)
Events for the Month of August, 2026
| << Previous Month | Today | Next Month >> | ||||
|
|
||||||
| Sunday | Monday | Tuesday | Wednesday | Thursday | Friday | Saturday |
|---|---|---|---|---|---|---|
|
1
Alternating Current
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 08/01/2026 must be completed by 08/01/2027
12:00am - 01:00am
Online
Application: Short Term Intensive Training (STIT) Funding
You may apply for funding in an approved program from 07/01/2026 - 06/30/2027
12:00am - 12:00am
Application: Strategic Workforce Initiative (SWI) Funding
You may apply for funding in an approved program from 07/01/2026 - 06/30/2027
12:00am - 12:00am
Application: Utah Works Funding
You may apply for funding in an approved program from 07/01/2026 - 06/30/2027
12:00am - 12:00am
Basic Controls
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 08/01/2026 must be completed by 08/01/2027
12:00am - 01:00am
Online
Complex Controls
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 08/01/2026 must be completed by 08/01/2027
12:00am - 01:00am
Online
Digital Circuits & Microprocessors
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 08/01/2026 must be completed by 08/01/2027
12:00am - 01:00am
Online
Direct Current
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 08/01/2026 must be completed by 08/01/2027
12:00am - 01:00am
Online
Electrical Safety
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 08/01/2026 must be completed by 08/01/2027
12:00am - 01:00am
Online
Filament Winding Composite Technician
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
IPC J Standard Certification
This 30 hour class runs from July 21, 2026 through August 4, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm.
12:00am - 12:00am
Westpointe Center - SSB, 224
Instrumentation
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 08/01/2026 must be completed by 08/01/2027
12:00am - 01:00am
Online
Integrated Controls
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 08/01/2026 must be completed by 08/01/2027
12:00am - 01:00am
Online
Motors & VFD Systems
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 08/01/2026 must be completed by 08/01/2027
12:00am - 01:00pm
Online
Pre Preg Composite Repair
This course is in-person and will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Syllabus can be accessed through Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Westpointe Center - WWTE, 120
Pre-Preg, Bonding & Core Materials
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Semiconductors
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 08/01/2026 must be completed by 08/01/2027
12:00am - 01:00am
Online
Vacuum Infusion Composite Technician
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Vacuum Infusion, Bonding & Core Materials
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Wet Layup Bonding & Core Materials
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Wet Layup Composite Technician
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Wet Layup Mold Making
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Applied Emissions
Course is self-paced and 100% online. You can access content as soon as you are registered. The required 24 hours of training must be completed by August 31, 2026.
08:00am - 08:01am
Online
Beginning Riders Taylorsville
Daily, starting on Saturday, 08/01/2026 and Sunday, 08/02/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
Experienced Riders Taylorsville
Saturday 08/01/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
UHP Light-Duty Safety Inspection
Class is held on August 1 & 8 from 8:00 to 4:30 PM on the Miller Campus, 9750 South 300 West, Miller Free Enterprise Center (MFEC) Bldg. #3, Room 113.
08:00am - 04:30pm
Miller Campus - MFEC, 113
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am - noon on 8/1/2026.
10:00am - 12:00pm
Miller Campus - MFEC, 107
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 8/1/2026.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
|
||||||
|
2
IPC J Standard Certification
This 30 hour class runs from July 21, 2026 through August 4, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm.
12:00am - 12:00am
Westpointe Center - SSB, 224
Beginning Riders Taylorsville
Daily, starting on Saturday, 08/01/2026 and Sunday, 08/02/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
|
3
IPC J Standard Certification
This 30 hour class runs from July 21, 2026 through August 4, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm.
12:00am - 12:00am
Westpointe Center - SSB, 224
AutoCAD Fundamentals
This course meets in-person in MFEC 208 every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/30/26. Note: no class 9/7 (Labor Day) and 9/23
05:30pm - 08:30pm
Miller Campus - MFEC, 208
SolidWorks Essentials
Class meets online via Zoom every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/28/26. Note: no class on 9/7 (Labor Day).
05:30pm - 08:30pm
Online
|
4
Basic Computer Skills III: Introduction to Excel
The class runs from July 28, 2026 to August 20, 2026 and will meet every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The classroom is located at the Salt Lake Community College Miller campus, Miller Professional Development Center (MPDC) building, Room 118 (Miller-MPDC-118).
09:00am - 12:00pm
Miller Campus - MPDC, 118
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 8/4/2026.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 8/4/26 and ending 9/24/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
|
5
Pre-Preg Composite Technician
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
AutoCAD Fundamentals
This course meets in-person in MFEC 208 every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/30/26. Note: no class 9/7 (Labor Day) and 9/23
05:30pm - 08:30pm
Miller Campus - MFEC, 208
SolidWorks Essentials
Class meets online via Zoom every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/28/26. Note: no class on 9/7 (Labor Day).
05:30pm - 08:30pm
Online
|
6
Basic Computer Skills III: Introduction to Excel
The class runs from July 28, 2026 to August 20, 2026 and will meet every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The classroom is located at the Salt Lake Community College Miller campus, Miller Professional Development Center (MPDC) building, Room 118 (Miller-MPDC-118).
09:00am - 12:00pm
Miller Campus - MPDC, 118
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 8/4/26 and ending 9/24/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
|
7
3 Wheel Rider Taylorsville
Every day, starting on Friday 08/07/2026 and ending on Saturday, 08/08/2026, from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
Beginning Riders Jordan
Daily, starting on Friday, 08/07/2026 and Saturday, 08/08/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Jordan Campus - HTC, Lot J3
|
8
3 Wheel Rider Taylorsville
Every day, starting on Friday 08/07/2026 and ending on Saturday, 08/08/2026, from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
Beginning Riders Jordan
Daily, starting on Friday, 08/07/2026 and Saturday, 08/08/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Jordan Campus - HTC, Lot J3
Beginning Riders Taylorsville
Daily, starting on Saturday, 08/08/2026 and Sunday, 08/09/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
UHP Light-Duty Safety Inspection
Class is held on August 1 & 8 from 8:00 to 4:30 PM on the Miller Campus, 9750 South 300 West, Miller Free Enterprise Center (MFEC) Bldg. #3, Room 113.
08:00am - 04:30pm
Miller Campus - MFEC, 113
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am - Noon on 8/8/2026.
10:00am - 12:00pm
Miller Campus - MFEC, 107
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 8/8/2026.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
|
|
9
Beginning Riders Jordan
Weekly, starting on Sunday, 08/09/2026 and Sunday, 08/16/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Jordan Campus - HTC, Lot J3
Beginning Riders Taylorsville
Daily, starting on Saturday, 08/08/2026 and Sunday, 08/09/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
|
10
Substitute Teacher Workshop
Please join the Webinar Monday, August 10th, 2026 from 5pm to 8pm by logging into Canvas. Select the Zoom tab in the left hand of the Menu.
05:00pm - 08:00pm
Online
AutoCAD Fundamentals
This course meets in-person in MFEC 208 every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/30/26. Note: no class 9/7 (Labor Day) and 9/23
05:30pm - 08:30pm
Miller Campus - MFEC, 208
Basic Computer Skills II: Introduction to Word
The class runs from August 10, 2026 to September 2, 2026 and will meet every Monday from 5:30pm to 8:30pm and every Wednesday from 5:30pm to 7:30pm. The classroom is located at Salt Lake Community College's Taylorsville campus, Construction Trades (CT) building, Room 018E (TRR-CT-018E).
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018E
SolidWorks Essentials
Class meets online via Zoom every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/28/26. Note: no class on 9/7 (Labor Day).
05:30pm - 08:30pm
Online
Orientation to Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/10/2026 to 09/28/2026, and are held Monday and Wednesday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A, except for Monday 08/17 and Monday 08/31 which will be in Building #1 Miller Professional Development Center (MPDC) room 114. There will be no class on Monday 08/24 or 09/07.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
|
11
Basic Computer Skills III: Introduction to Excel
The class runs from July 28, 2026 to August 20, 2026 and will meet every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The classroom is located at the Salt Lake Community College Miller campus, Miller Professional Development Center (MPDC) building, Room 118 (Miller-MPDC-118).
09:00am - 12:00pm
Miller Campus - MPDC, 118
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 8/11/2026.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
Advanced Excel
The course runs from August 11, 2026 to September 3, 2026. Classes meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Larry H. Miller campus, Miller Free Enterprise Center (MFEC) building, room 229 (LHM-MFEC-229).
05:30pm - 08:30pm
Miller Campus - MFEC, 229
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 8/4/26 and ending 9/24/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
Math for Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/11/2026 to 09/29/2026, and are held Tuesday and Thursday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A. Students will need a scientific calculator for the course, but no textbook purchase is required.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
|
12
Utah Notary Training Workshop
Course Date: 8/12/26; You DO NOT have to set up a Canvas account. IGNORE those instructions at the bottom of the confirmation. The Utah Notary Public Training Workshop is a one-time, 5-hour workshop designed to prepare students to take the Utah State Notary Public online exam. There are no follow-up workshops and SLCC does not administer the exam.
10:00am - 03:00pm
Miller Campus - MFEC, 206
AutoCAD Fundamentals
This course meets in-person in MFEC 208 every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/30/26. Note: no class 9/7 (Labor Day) and 9/23
05:30pm - 08:30pm
Miller Campus - MFEC, 208
Basic Computer Skills II: Introduction to Word
The class runs from August 10, 2026 to September 2, 2026 and will meet every Monday from 5:30pm to 8:30pm and every Wednesday from 5:30pm to 7:30pm. The classroom is located at Salt Lake Community College's Taylorsville campus, Construction Trades (CT) building, Room 018E (TRR-CT-018E).
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018E
SolidWorks Essentials
Class meets online via Zoom every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/28/26. Note: no class on 9/7 (Labor Day).
05:30pm - 08:30pm
Online
Orientation to Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/10/2026 to 09/28/2026, and are held Monday and Wednesday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A, except for Monday 08/17 and Monday 08/31 which will be in Building #1 Miller Professional Development Center (MPDC) room 114. There will be no class on Monday 08/24 or 09/07.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
|
13
Basic Computer Skills III: Introduction to Excel
The class runs from July 28, 2026 to August 20, 2026 and will meet every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The classroom is located at the Salt Lake Community College Miller campus, Miller Professional Development Center (MPDC) building, Room 118 (Miller-MPDC-118).
09:00am - 12:00pm
Miller Campus - MPDC, 118
Advanced Excel
The course runs from August 11, 2026 to September 3, 2026. Classes meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Larry H. Miller campus, Miller Free Enterprise Center (MFEC) building, room 229 (LHM-MFEC-229).
05:30pm - 08:30pm
Miller Campus - MFEC, 229
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 8/4/26 and ending 9/24/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
Math for Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/11/2026 to 09/29/2026, and are held Tuesday and Thursday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A. Students will need a scientific calculator for the course, but no textbook purchase is required.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
|
14
Substation Apprenticeship 4B
"This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on 11/27/2026."
07:00am - 05:30pm
Miller Campus - MCPC, 123
Beginning Riders Jordan
Daily, starting on Friday, 08/14/2026 and Saturday, 08/15/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Jordan Campus - HTC, Lot J3
Beginning Riders Ogden
Daily, starting on Friday, 08/14/2026 and Saturday, 08/15/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Washington Heights Church
|
15
Beginning Riders Jordan
Daily, starting on Friday, 08/14/2026 and Saturday, 08/15/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Jordan Campus - HTC, Lot J3
Beginning Riders Ogden
Daily, starting on Friday, 08/14/2026 and Saturday, 08/15/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Washington Heights Church
Beginning Riders Taylorsville
Daily, starting on Saturday, 08/15/2026 and Sunday, 08/16/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
Experienced Riders Taylorsville
Saturday 08/15/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am - Noon on 8/15/2026.
10:00am - 12:00pm
Miller Campus - MFEC, 107
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 8/15/2026.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
|
|
16
Advanced Riders Taylorsville
Sunday, 08/16/2026 from 8:00 a.m. to 3:00 p.m.
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
Beginning Riders Jordan
Weekly, starting on Sunday, 08/09/2026 and Sunday, 08/16/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Jordan Campus - HTC, Lot J3
Beginning Riders Taylorsville
Daily, starting on Saturday, 08/15/2026 and Sunday, 08/16/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
|
17
AutoCAD Fundamentals
This course meets in-person in MFEC 208 every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/30/26. Note: no class 9/7 (Labor Day) and 9/23
05:30pm - 08:30pm
Miller Campus - MFEC, 208
Basic Computer Skills II: Introduction to Word
The class runs from August 10, 2026 to September 2, 2026 and will meet every Monday from 5:30pm to 8:30pm and every Wednesday from 5:30pm to 7:30pm. The classroom is located at Salt Lake Community College's Taylorsville campus, Construction Trades (CT) building, Room 018E (TRR-CT-018E).
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018E
SolidWorks Essentials
Class meets online via Zoom every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/28/26. Note: no class on 9/7 (Labor Day).
05:30pm - 08:30pm
Online
Orientation to Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/10/2026 to 09/28/2026, and are held Monday and Wednesday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A, except for Monday 08/17 and Monday 08/31 which will be in Building #1 Miller Professional Development Center (MPDC) room 114. There will be no class on Monday 08/24 or 09/07.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
|
18
Introduction to Quality Systems
Class will run from 8/18/26 through 9/29/26 100% online for 7 weeks. The online classroom is open 24/7 once the course begins. Your instructor will give you instructions through Canvas regarding participation expectations, course logistics, and classroom management. Contact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
12:00am - 12:00am
Online
Basic Computer Skills III: Introduction to Excel
The class runs from July 28, 2026 to August 20, 2026 and will meet every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The classroom is located at the Salt Lake Community College Miller campus, Miller Professional Development Center (MPDC) building, Room 118 (Miller-MPDC-118).
09:00am - 12:00pm
Miller Campus - MPDC, 118
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 8/18/2026.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
Advanced Excel
The course runs from August 11, 2026 to September 3, 2026. Classes meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Larry H. Miller campus, Miller Free Enterprise Center (MFEC) building, room 229 (LHM-MFEC-229).
05:30pm - 08:30pm
Miller Campus - MFEC, 229
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 8/4/26 and ending 9/24/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
Math for Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/11/2026 to 09/29/2026, and are held Tuesday and Thursday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A. Students will need a scientific calculator for the course, but no textbook purchase is required.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
|
19
Leading with a Coach Approach
Every day, starting on 08/19/26 and ending on 08/19/26
08:00am - 04:00pm
Westpointe Center - WWTE, 215
Certified Registered Pool Operator
Live 2-Day: Course Dates: 8/19/26 and 8/20/26; This course is taught on Wednesday and Thursday, two full days from 9:00 am to 4:00 pm each day. Click on "Full Schedule". You DO NOT need to login to Canvas account or access www.slcc.edu for any reason. Contact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
09:00am - 04:00pm
Miller Campus - MFEC, 206
Certified Registered Pool Operator
Webinar 2-Day: Course Dates: 8/19/26 to 8/20/26; Click on "Full Schedule". This course is taught on Wednesday and Thursday from 9:00 am to 4:00 pm, two full days via LIVE webinar. We will send you a direct link to the webinar via email. You DO NOT need to login to Canvas or access www.slcc.edu for any reason.
09:00am - 04:00pm
Online
AutoCAD Fundamentals
This course meets in-person in MFEC 208 every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/30/26. Note: no class 9/7 (Labor Day) and 9/23
05:30pm - 08:30pm
Miller Campus - MFEC, 208
Basic Computer Skills II: Introduction to Word
The class runs from August 10, 2026 to September 2, 2026 and will meet every Monday from 5:30pm to 8:30pm and every Wednesday from 5:30pm to 7:30pm. The classroom is located at Salt Lake Community College's Taylorsville campus, Construction Trades (CT) building, Room 018E (TRR-CT-018E).
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018E
SolidWorks Essentials
Class meets online via Zoom every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/28/26. Note: no class on 9/7 (Labor Day).
05:30pm - 08:30pm
Online
Orientation to Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/10/2026 to 09/28/2026, and are held Monday and Wednesday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A, except for Monday 08/17 and Monday 08/31 which will be in Building #1 Miller Professional Development Center (MPDC) room 114. There will be no class on Monday 08/24 or 09/07.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
|
20
Basic Computer Skills III: Introduction to Excel
The class runs from July 28, 2026 to August 20, 2026 and will meet every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The classroom is located at the Salt Lake Community College Miller campus, Miller Professional Development Center (MPDC) building, Room 118 (Miller-MPDC-118).
09:00am - 12:00pm
Miller Campus - MPDC, 118
Certified Registered Pool Operator
Live 2-Day: Course Dates: 8/19/26 and 8/20/26; This course is taught on Wednesday and Thursday, two full days from 9:00 am to 4:00 pm each day. Click on "Full Schedule". You DO NOT need to login to Canvas account or access www.slcc.edu for any reason. Contact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
09:00am - 04:00pm
Miller Campus - MFEC, 206
Certified Registered Pool Operator
Webinar 2-Day: Course Dates: 8/19/26 to 8/20/26; Click on "Full Schedule". This course is taught on Wednesday and Thursday from 9:00 am to 4:00 pm, two full days via LIVE webinar. We will send you a direct link to the webinar via email. You DO NOT need to login to Canvas or access www.slcc.edu for any reason.
09:00am - 04:00pm
Online
Advanced Excel
The course runs from August 11, 2026 to September 3, 2026. Classes meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Larry H. Miller campus, Miller Free Enterprise Center (MFEC) building, room 229 (LHM-MFEC-229).
05:30pm - 08:30pm
Miller Campus - MFEC, 229
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 8/4/26 and ending 9/24/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
Math for Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/11/2026 to 09/29/2026, and are held Tuesday and Thursday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A. Students will need a scientific calculator for the course, but no textbook purchase is required.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
|
21
Substation Apprenticeship 4B
"This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on 11/27/2026."
07:00am - 05:30pm
Miller Campus - MCPC, 123
Beginning Riders Taylorsville
Daily, starting on Friday, 08/21/2026 and Saturday, 08/22/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
|
22
3 Wheel Rider Taylorsville
Every day, starting on Saturday 08/22/2026 and ending on Sunday, 08/23/2026, from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
Beginning Riders Jordan
Daily, starting on Saturday, 08/22/2026 and Sunday, 08/23/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Jordan Campus - HTC, Lot J3
Beginning Riders Taylorsville
Daily, starting on Friday, 08/21/2026 and Saturday, 08/22/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
UHP Heavy-Duty Safety Inspection
Class is scheduled for August 22 & 29 from 8:00 to 5:00 PM on the Westpointe Campus, 1060 N Flyer Way, Salt Lake City, UT 84116. Class will be held in the Westpointe Workforce Training & Education Center (WWTE) building, Room 159. The entrance is on the north side of the building.
08:00am - 05:00pm
Westpointe Center - WWTE, 159
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am -Noon on 8/22/2026.
10:00am - 12:00pm
Miller Campus - MFEC, 107
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 8/22/2026.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
|
|
23
3 Wheel Rider Taylorsville
Every day, starting on Saturday 08/22/2026 and ending on Sunday, 08/23/2026, from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
Beginning Riders Jordan
Daily, starting on Saturday, 08/22/2026 and Sunday, 08/23/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Jordan Campus - HTC, Lot J3
Returning Riders Taylorsville
On Sunday 08/23/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
|
24
AutoCAD Fundamentals
This course meets in-person in MFEC 208 every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/30/26. Note: no class 9/7 (Labor Day) and 9/23
05:30pm - 08:30pm
Miller Campus - MFEC, 208
Basic Computer Skills II: Introduction to Word
The class runs from August 10, 2026 to September 2, 2026 and will meet every Monday from 5:30pm to 8:30pm and every Wednesday from 5:30pm to 7:30pm. The classroom is located at Salt Lake Community College's Taylorsville campus, Construction Trades (CT) building, Room 018E (TRR-CT-018E).
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018E
Salesforce Administrator
This Salesforce Administrator training will run from August 24, 2026 to November 9, 2026. Classes will be held each Monday and Wednesday from 5:30PM-8:30PM at the SLCC Larry H. Miller campus in the Miller Professional Development Center, Room 118 (LHM-MPDC-118). No Class on September 7 (Labor Day).
05:30pm - 08:30pm
Miller Campus - MPDC, 118
SolidWorks Essentials
Class meets online via Zoom every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/28/26. Note: no class on 9/7 (Labor Day).
05:30pm - 08:30pm
Online
|
25
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 8/25/2026.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
Advanced Excel
The course runs from August 11, 2026 to September 3, 2026. Classes meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Larry H. Miller campus, Miller Free Enterprise Center (MFEC) building, room 229 (LHM-MFEC-229).
05:30pm - 08:30pm
Miller Campus - MFEC, 229
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 8/4/26 and ending 9/24/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
QuickBooks Essentials
This course meets in-person in MPDC 118 at Larry H. Miller Campus on Tuesday evenings 5:30pm - 8:30pm beginning on 8/25/26. On Tuesday, 10/6/26 there will be an optional review session from 5:30pm - 8:30pm. The optional QuickBooks Certified User Exam will be proctored in-person on Tuesday, 10/13/26 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 118
Math for Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/11/2026 to 09/29/2026, and are held Tuesday and Thursday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A. Students will need a scientific calculator for the course, but no textbook purchase is required.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
|
26
AutoCAD Fundamentals
This course meets in-person in MFEC 208 every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/30/26. Note: no class 9/7 (Labor Day) and 9/23
05:30pm - 08:30pm
Miller Campus - MFEC, 208
Basic Computer Skills II: Introduction to Word
The class runs from August 10, 2026 to September 2, 2026 and will meet every Monday from 5:30pm to 8:30pm and every Wednesday from 5:30pm to 7:30pm. The classroom is located at Salt Lake Community College's Taylorsville campus, Construction Trades (CT) building, Room 018E (TRR-CT-018E).
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018E
Salesforce Administrator
This Salesforce Administrator training will run from August 24, 2026 to November 9, 2026. Classes will be held each Monday and Wednesday from 5:30PM-8:30PM at the SLCC Larry H. Miller campus in the Miller Professional Development Center, Room 118 (LHM-MPDC-118). No Class on September 7 (Labor Day).
05:30pm - 08:30pm
Miller Campus - MPDC, 118
SolidWorks Essentials
Class meets online via Zoom every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/28/26. Note: no class on 9/7 (Labor Day).
05:30pm - 08:30pm
Online
Lineworker Apprenticeship 3A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Lab work will be 6pm to 9pm on Wednesdays beginning August 26, 2026, through December 9, 2026, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics. There will be no class on Wednesday 11/25/2026 due to holiday.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
Lineworker Apprenticeship 3B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Lab work will be 6pm to 9pm on Wednesdays beginning August 26, 2026, through December 9, 2026, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics. There will be no class on Wednesday 11/25/2026 due to holiday.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
Lineworker Apprenticeship 4A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Lab work will be 6pm to 9pm on Wednesdays beginning August 26, 2026, through December 9, 2026, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics. There will be no class on Wednesday 11/25/2026 due to holiday.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
Lineworker Apprenticeship 4B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Lab work will be 6pm to 9pm on Wednesdays beginning August 26, 2026, through December 9, 2026, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics. There will be no class on Wednesday 11/25/2026 due to holiday.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
Orientation to Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/10/2026 to 09/28/2026, and are held Monday and Wednesday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A, except for Monday 08/17 and Monday 08/31 which will be in Building #1 Miller Professional Development Center (MPDC) room 114. There will be no class on Monday 08/24 or 09/07.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
|
27
IPC 610 Certification
This 30 hour class runs from August 26, 2026 through September 2, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm.
12:00am - 12:00am
Westpointe Center - SSB, 224
Advanced Excel
The course runs from August 11, 2026 to September 3, 2026. Classes meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Larry H. Miller campus, Miller Free Enterprise Center (MFEC) building, room 229 (LHM-MFEC-229).
05:30pm - 08:30pm
Miller Campus - MFEC, 229
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 8/4/26 and ending 9/24/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
Math for Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/11/2026 to 09/29/2026, and are held Tuesday and Thursday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A. Students will need a scientific calculator for the course, but no textbook purchase is required.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
|
28
IPC 610 Certification
This 30 hour class runs from August 26, 2026 through September 2, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm.
12:00am - 12:00am
Westpointe Center - SSB, 224
Pre-Preg Composite Technician
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Meter Apprenticeship 3A
"This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on Friday 11/27/2026."
07:00am - 05:00pm
Miller Campus - MCPC, 120A
Meter Apprenticeship 4B
"This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on Friday 11/27/2026."
07:00am - 05:00pm
Miller Campus - MCPC, 120A
Substation Apprenticeship 1A
"This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on 11/27/2026."
07:00am - 05:00pm
Miller Campus - MCPC, 123
Substation Apprenticeship 1B
"This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on 11/27/26."
07:00am - 05:30pm
Miller Campus - MCPC, 123
Substation Apprenticeship 2A
"This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on Friday 11/27/2026."
07:00am - 05:30pm
Miller Campus - MCPC, 123
Substation Apprenticeship 2B
"This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on 11/27/2026."
07:00am - 05:30pm
Miller Campus - MCPC, 123
Substation Apprenticeship 3A
"This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on 11/27/2026."
07:00am - 07:30pm
Miller Campus - MCPC, 123
Substation Apprenticeship 3B
"This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on 11/27/2026."
07:00am - 05:30pm
Miller Campus - MCPC, 123
Substation Apprenticeship 4B
"This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on 11/27/2026."
07:00am - 05:30pm
Miller Campus - MCPC, 123
Beginning Riders Jordan
Daily, starting on Friday, 08/28/2026 and Saturday, 08/29/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Jordan Campus - HTC, Lot J3
Meter Apprenticeship 1B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on Friday 11/27/2026.
08:00am - 05:00pm
Miller Campus - MCPC, 120A
Meter Apprenticeship 2A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on 11/27/2026 for the Holiday.
08:00am - 05:00pm
Miller Campus - MCPC, 120A
Meter Apprenticeship 2B
"This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on Friday 11/27/2026."
08:00am - 05:00pm
Miller Campus - MCPC, 120A
Meter Apprenticeship 3B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on Friday 11/27/2026.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
Meter Apprenticeship 4A
"This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Labs will be held twice a month on Fridays beginning August 28, 2026 through December 4, 2026, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class. No classes will be held on Friday 11/27/2026."
08:00am - 05:00pm
Miller Campus - MCPC, 120A
|
29
IPC 610 Certification
This 30 hour class runs from August 26, 2026 through September 2, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm.
12:00am - 12:00am
Westpointe Center - SSB, 224
Beginning Riders Jordan
Daily, starting on Friday, 08/28/2026 and Saturday, 08/29/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Jordan Campus - HTC, Lot J3
Beginning Riders Taylorsville
Weekly, starting on Saturday, 08/29/2026 and Saturday, 09/05/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
UHP Heavy-Duty Safety Inspection
Class is scheduled for August 22 & 29 from 8:00 to 5:00 PM on the Westpointe Campus, 1060 N Flyer Way, Salt Lake City, UT 84116. Class will be held in the Westpointe Workforce Training & Education Center (WWTE) building, Room 159. The entrance is on the north side of the building.
08:00am - 05:00pm
Westpointe Center - WWTE, 159
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am - Noon on 8/29/2026.
10:00am - 12:00pm
Miller Campus - MFEC, 107
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 8/29/2026.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
|
|
30
IPC 610 Certification
This 30 hour class runs from August 26, 2026 through September 2, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm.
12:00am - 12:00am
Westpointe Center - SSB, 224
|
31
Filament Winding Composite Technician
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
IPC 610 Certification
This 30 hour class runs from August 26, 2026 through September 2, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm.
12:00am - 12:00am
Westpointe Center - SSB, 224
Pre Preg Composite Repair
This course is in-person and will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Syllabus can be accessed through Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Westpointe Center - WWTE, 120
Pre-Preg, Bonding & Core Materials
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Vacuum Infusion Composite Technician
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Vacuum Infusion, Bonding & Core Materials
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Wet Layup Bonding & Core Materials
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Wet Layup Composite Technician
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Wet Layup Mold Making
This course will be completed at your own pace. Starts 08/01/26 and must be completed by 08/31/26. Online content can be accessed anytime on Canvas. Lab hours will be scheduled directly with the instructors Monday through Friday 8am to 6pm.
12:00am - 01:00am
Online
Applied Emissions
Course is self-paced and 100% online. You can access content as soon as you are registered. The required 24 hours of training must be completed by August 31, 2026.
08:00am - 08:01am
Online
Instructor Institute Online
This session is an online, asynchronous course that will take 8 hours total to complete. To receive the micro credential, you must attend 4 hours of coaching office hours that are offered by Emily Huillet. She will be holding these sessions at 2pm on Thursdays from June 25th through August 13th. If you can't ever make these times, please let Emily know at ehuillet@slcc.edu and she will schedule make up sessions for you. For the other 4 hours, you must complete online training provided on Canvas.
12:00pm - 12:01pm
Online
AutoCAD Fundamentals
This course meets in-person in MFEC 208 every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/30/26. Note: no class 9/7 (Labor Day) and 9/23
05:30pm - 08:30pm
Miller Campus - MFEC, 208
Basic Computer Skills II: Introduction to Word
The class runs from August 10, 2026 to September 2, 2026 and will meet every Monday from 5:30pm to 8:30pm and every Wednesday from 5:30pm to 7:30pm. The classroom is located at Salt Lake Community College's Taylorsville campus, Construction Trades (CT) building, Room 018E (TRR-CT-018E).
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018E
Salesforce Administrator
This Salesforce Administrator training will run from August 24, 2026 to November 9, 2026. Classes will be held each Monday and Wednesday from 5:30PM-8:30PM at the SLCC Larry H. Miller campus in the Miller Professional Development Center, Room 118 (LHM-MPDC-118). No Class on September 7 (Labor Day).
05:30pm - 08:30pm
Miller Campus - MPDC, 118
SolidWorks Essentials
Class meets online via Zoom every Monday and Wednesday from 5:30pm - 8:30pm starting 8/3/26 and ending 9/28/26. Note: no class on 9/7 (Labor Day).
05:30pm - 08:30pm
Online
Lineworker Apprenticeship 1A
Every week on Monday, starting on 08/31/26 and ending on 12/07/26 (excluding 09/07/26, 10/12/26)
06:00pm - 09:00pm
Miller Campus - MCPC, 127
Lineworker Apprenticeship 1B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2026, through December 10, 2026. Lab work will be 6pm to 9pm on Mondays beginning August 31, 2026, through December 7, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and /from instructors for weekly specifics. There will be no class on Monday 09/07/2026 and 10/12/2026 for holidays.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
Lineworker Apprenticeship 2A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Lab work will be 6pm to 9pm on Mondays beginning August 31, 2026, through December 7, 2026, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics. No classes will be held on Monday 09/07/2026 or 10/12/2026 due to holidays.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
Lineworker Apprenticeship 2B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 25, 2026, through December 10, 2026. Lab work will be 6pm to 9pm on Mondays beginning August 31, 2026, through December 7, 2026, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics. No classes will be held on Monday 09/07/2026 or 10/12/2026 due to holidays.
06:00pm - 09:00pm
Miller Campus - MCPC, 127
Orientation to Lineworker Pre-Apprenticeship
This is a Hybrid Course with online and in-person lab work. Classes run 08/10/2026 to 09/28/2026, and are held Monday and Wednesday from 6-9pm on Miller Campus Building #5 Miller Corporate Partnership Center (MCPC) in room 120A, except for Monday 08/17 and Monday 08/31 which will be in Building #1 Miller Professional Development Center (MPDC) room 114. There will be no class on Monday 08/24 or 09/07.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
|
|||||
| << Previous Month | Today | Next Month >> | ||||