Cart (0)
Events for the Month of June, 2026
| << Previous Month | Today | Next Month >> | ||||
|
|
||||||
| Sunday | Monday | Tuesday | Wednesday | Thursday | Friday | Saturday |
|---|---|---|---|---|---|---|
|
1
Application for Utah Works Funding
You may apply for funding in an approved program from 07/01/2025 - 06/30/2026
12:00am - 12:00am
954 Seats remaining
Application: Strategic Workforce Initiative (SWI) Funding
You may apply for funding in an approved program from 07/01/2025 - 06/30/2026
12:00am - 12:00am
830 Seats remaining
Instrumentation
This is a hybrid, asynchronous course. Online content can be accessed anytime on Canvas, and labs will be scheduled directly with the instructors Monday through Friday 8am to 6pm. This course starts 06/01/2026 must be completed by 06/01/2027
12:00am - 01:00am
Online
18 Seats remaining
Applied Emissions
Course is self-paced and 100% online. You can access content as soon as you are registered. The required 24 hours of training must be completed by June 30, 2026.
08:00am - 08:01am
Online
496 Seats remaining
Elementary Methods of Teaching Literacy #1
Course is Hybrid (Online + Webinar). The webinar meetings are every Monday from June 1st to June 29th, 2026, from 5:30pm to 8:30pm. You will have until July 5th, 2026 to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
16 Seats remaining
|
2
Genealogy - Preparing for Accredited Genealogist
Course Dates: 6/2/26 through 9/22/26. This is the last time this course will be taught. The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
5 Seats remaining
Genealogy and Family History Writing
Course Dates: 6/2/26 through 7/28/26. This is the last time this course will be taught. The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
10 Seats remaining
Genealogy-Tracing Immigrant Origins
Course Dates: 6/2/26 through 7/28/26. This is the last time this course will be taught. The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
10 Seats remaining
Genealogy-Writing Life Stories
Course Dates: 6/2/26 through 7/28/26. This is the last time this course will be taught. The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
10 Seats remaining
Genetic Genealogy
Course Dates: 6/2/26 through 7/28/26. This is the last time this course will be taught. The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
9 Seats remaining
IPC J Standard Certification
This 30 hour class runs from June 1, 2026 through June 8, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
6 Seats remaining
Intro to High-Tech Genealogy
Course Dates: 6/2/26 through 7/28/26. This is the last time this course will be taught. The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
10 Seats remaining
U.S. Genealogy Research I
Course Dates: 6/2/26 through 7/28/26. This is the last time this course will be taught. The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
10 Seats remaining
U.S. Genealogy Research II
Course Dates: This is the last time this course will be taught. It is a full semester course that runs from 6/2/26 through 9/22/26. The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
9 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 6/2/2026.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
0 Seats remaining
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 6/2/26 and ending 7/23/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
9 Seats remaining
|
3
IPC J Standard Certification
This 30 hour class runs from June 1, 2026 through June 8, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
6 Seats remaining
Introduction to Medical Device Industry
Class will run from 5/20/26 through 7/1/26 in person on Wednesday evenings from 6:00 pm to 9:00 pm for 6 weeks at the Miller Campus, classroom TBD. Contact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
06:00pm - 09:00pm
Miller Campus - MCPC, 110
5 Seats remaining
|
4
IPC J Standard Certification
This 30 hour class runs from June 1, 2026 through June 8, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
6 Seats remaining
Instructional Practices that Promote Student Learning
Course is hybrid format (Online + Webinar). Meetings are scheduled every Thursday from May 21st, 2026 to June 18th, 2026 from 4:30pm to 7:30pm. Students will have until June 24th, 2026 to complete your course work. Check for assignment dates in Canvas.
04:30pm - 07:30pm
Online
19 Seats remaining
Classroom Climate that Promotes Student Learning
Course is Hybrid (Online + Webinar). The webinar meetings are every Thursday from 05/21/26 to 06/18/2026, from 5pm to 8pm. You will have until June 24th, 2026 to complete your course work. Check for assignments' dates in Canvas.
05:00pm - 08:00pm
Online
18 Seats remaining
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 6/2/26 and ending 7/23/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
9 Seats remaining
|
5
IPC J Standard Certification
This 30 hour class runs from June 1, 2026 through June 8, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
6 Seats remaining
Beginning Riders Ogden
Daily, starting on Friday, 06/05/2026 and Saturday, 06/06/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Washington Heights Church
9 Seats remaining
Beginning Riders Taylorsville
Daily, starting on Friday, 06/05/2026 and Saturday, 06/06/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
3 Seats remaining
|
6
IPC J Standard Certification
This 30 hour class runs from June 1, 2026 through June 8, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
6 Seats remaining
Beginning Riders Ogden
Daily, starting on Friday, 06/05/2026 and Saturday, 06/06/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Washington Heights Church
9 Seats remaining
Beginning Riders Taylorsville
Daily, starting on Friday, 06/05/2026 and Saturday, 06/06/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
3 Seats remaining
Beginning Riders Taylorsville
Daily, starting on Saturday, 06/06/2026 and Sunday, 06/07/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
6 Seats remaining
UHP Light-Duty Safety Inspection
Class is held on June 6 & 13 from 8:00 to 4:30 PM on the Miller Campus, 9750 South 300 West, Miller Free Enterprise Center (MFEC) Bldg. #3, Room 113.
08:00am - 04:30pm
Miller Campus - MFEC, 113
9 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am-Noon on 6/6/2026.
10:00am - 12:00pm
Miller Campus - MFEC, 107
0 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 6/6/2026.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
0 Seats remaining
|
|
|
7
IPC J Standard Certification
This 30 hour class runs from June 1, 2026 through June 8, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
6 Seats remaining
Beginning Riders Jordan
Weekly, starting on Sunday, 06/07/2026 and Sunday, 06/14/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Jordan Campus - HTC, Lot J3
9 Seats remaining
Beginning Riders Taylorsville
Daily, starting on Saturday, 06/06/2026 and Sunday, 06/07/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
6 Seats remaining
|
8
Elementary Methods of Teaching Literacy #1
Course is Hybrid (Online + Webinar). The webinar meetings are every Monday from June 1st to June 29th, 2026, from 5:30pm to 8:30pm. You will have until July 5th, 2026 to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
16 Seats remaining
|
9
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 6/9/2026.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
0 Seats remaining
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 6/2/26 and ending 7/23/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
9 Seats remaining
|
10
Utah Notary Training Workshop
Course Date: 6/10/26; You DO NOT have to set up a Canvas account. IGNORE those instructions at the bottom of the confirmation. The Utah Notary Public Training Workshop is a one-time, 5-hour workshop designed to prepare students to take the Utah State Notary Public online exam. There are no follow-up workshops and SLCC does not administer the exam.
10:00am - 03:00pm
Miller Campus - MFEC, 206
20 Seats remaining
Introduction to Medical Device Industry
Class will run from 5/20/26 through 7/1/26 in person on Wednesday evenings from 6:00 pm to 9:00 pm for 6 weeks at the Miller Campus, classroom TBD. Contact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
06:00pm - 09:00pm
Miller Campus - MCPC, 110
5 Seats remaining
|
11
Instructional Practices that Promote Student Learning
Course is hybrid format (Online + Webinar). Meetings are scheduled every Thursday from May 21st, 2026 to June 18th, 2026 from 4:30pm to 7:30pm. Students will have until June 24th, 2026 to complete your course work. Check for assignment dates in Canvas.
04:30pm - 07:30pm
Online
19 Seats remaining
Classroom Climate that Promotes Student Learning
Course is Hybrid (Online + Webinar). The webinar meetings are every Thursday from 05/21/26 to 06/18/2026, from 5pm to 8pm. You will have until June 24th, 2026 to complete your course work. Check for assignments' dates in Canvas.
05:00pm - 08:00pm
Online
18 Seats remaining
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 6/2/26 and ending 7/23/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
9 Seats remaining
|
12
|
13
Beginning Riders Taylorsville
Daily, starting on Saturday, 06/13/2026 and Sunday, 06/14/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
8 Seats remaining
UHP Light-Duty Safety Inspection
Class is held on June 6 & 13 from 8:00 to 4:30 PM on the Miller Campus, 9750 South 300 West, Miller Free Enterprise Center (MFEC) Bldg. #3, Room 113.
08:00am - 04:30pm
Miller Campus - MFEC, 113
9 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am-Noon on 6/13/2026.
10:00am - 12:00pm
Miller Campus - MFEC, 107
0 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 6/13/2026.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
0 Seats remaining
|
|
14
Beginning Riders Jordan
Weekly, starting on Sunday, 06/07/2026 and Sunday, 06/14/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Jordan Campus - HTC, Lot J3
9 Seats remaining
Beginning Riders Taylorsville
Daily, starting on Saturday, 06/13/2026 and Sunday, 06/14/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
8 Seats remaining
|
15
Elementary Methods of Teaching Literacy #1
Course is Hybrid (Online + Webinar). The webinar meetings are every Monday from June 1st to June 29th, 2026, from 5:30pm to 8:30pm. You will have until July 5th, 2026 to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
16 Seats remaining
|
16
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 6/16/2026.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
0 Seats remaining
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 6/2/26 and ending 7/23/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
9 Seats remaining
Introduction to Excel
The course runs from June 16, 2026 to June 25, 2026. Class will meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Miller Campus in the Miller Professional Development Center, room 118 (LHM-MPDC-118).
05:30pm - 08:30pm
Miller Campus - MPDC, 118
13 Seats remaining
Basic Manufacturing Skills
This course is held on campus, in person at the Miller Campus of SLCC, 9750 S 300 W, Sandy, Ut 84070, Room TBD. There are no books or materials required for this course. There is coursework that is accessed online through Canvas at the following link: slcc.edu https://slcc.instructure.com/login/canvasContact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
06:00pm - 09:00pm
Miller Campus - MPDC, 114
10 Seats remaining
|
17
Leading with Strategy
Every day, starting on 06/17/26 and ending on 06/17/26
08:00am - 04:00pm
Westpointe Center - WWTE, 215
28 Seats remaining
Certified Registered Pool Operator
Live 2-Day: Course Dates: 6/17/26 and 6/18/26; This course is taught on Wednesday and Thursday, two full days from 9:00 am to 4:00 pm each day. Click on "Full Schedule". You DO NOT need to login to Canvas account or access www.slcc.edu for any reason. Contact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
09:00am - 04:00pm
Miller Campus - MFEC, 206
14 Seats remaining
Certified Registered Pool Operator
Webinar 2-Day: Course Dates: 6/17/26 to 6/18/26; Click on "Full Schedule". This course is taught on Wednesday and Thursday from 9:00 am to 4:00 pm, two full days via LIVE webinar. We will send you a direct link to the webinar via email. You DO NOT need to login to Canvas or access www.slcc.edu for any reason.
09:00am - 04:00pm
Online
6 Seats remaining
Introduction to Medical Device Industry
Class will run from 5/20/26 through 7/1/26 in person on Wednesday evenings from 6:00 pm to 9:00 pm for 6 weeks at the Miller Campus, classroom TBD. Contact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
06:00pm - 09:00pm
Miller Campus - MCPC, 110
5 Seats remaining
|
18
IPC 610 Certification
This 30 hour class runs from June 17, 2026 through June 23, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
6 Seats remaining
Certified Registered Pool Operator
Live 2-Day: Course Dates: 6/17/26 and 6/18/26; This course is taught on Wednesday and Thursday, two full days from 9:00 am to 4:00 pm each day. Click on "Full Schedule". You DO NOT need to login to Canvas account or access www.slcc.edu for any reason. Contact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
09:00am - 04:00pm
Miller Campus - MFEC, 206
14 Seats remaining
Certified Registered Pool Operator
Webinar 2-Day: Course Dates: 6/17/26 to 6/18/26; Click on "Full Schedule". This course is taught on Wednesday and Thursday from 9:00 am to 4:00 pm, two full days via LIVE webinar. We will send you a direct link to the webinar via email. You DO NOT need to login to Canvas or access www.slcc.edu for any reason.
09:00am - 04:00pm
Online
6 Seats remaining
Instructional Practices that Promote Student Learning
Course is hybrid format (Online + Webinar). Meetings are scheduled every Thursday from May 21st, 2026 to June 18th, 2026 from 4:30pm to 7:30pm. Students will have until June 24th, 2026 to complete your course work. Check for assignment dates in Canvas.
04:30pm - 07:30pm
Online
19 Seats remaining
Classroom Climate that Promotes Student Learning
Course is Hybrid (Online + Webinar). The webinar meetings are every Thursday from 05/21/26 to 06/18/2026, from 5pm to 8pm. You will have until June 24th, 2026 to complete your course work. Check for assignments' dates in Canvas.
05:00pm - 08:00pm
Online
18 Seats remaining
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 6/2/26 and ending 7/23/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
9 Seats remaining
Introduction to Excel
The course runs from June 16, 2026 to June 25, 2026. Class will meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Miller Campus in the Miller Professional Development Center, room 118 (LHM-MPDC-118).
05:30pm - 08:30pm
Miller Campus - MPDC, 118
13 Seats remaining
|
19
IPC 610 Certification
This 30 hour class runs from June 17, 2026 through June 23, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
6 Seats remaining
Beginning Riders Taylorsville
Weekly, starting on Friday, 06/19/2026 and Friday, 06/26/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
11 Seats remaining
|
20
IPC 610 Certification
This 30 hour class runs from June 17, 2026 through June 23, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
6 Seats remaining
Beginning Riders Taylorsville
Daily, starting on Saturday, 06/20/2026 and Sunday, 06/21/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
10 Seats remaining
UHP Heavy-Duty Safety Inspection
Class is scheduled for June 20 & 27 from 8:00 to 5:00 PM on the Westpointe Campus, 1060 N Flyer Way, Salt Lake City, UT 84116. Class will be held in the Westpointe Workforce Training & Education Center (WWTE) building, Room 159. The entrance is on the north side of the building.
08:00am - 05:00pm
Westpointe Center - WWTE, 159
0 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am-Noon on 6/20/2026.
10:00am - 12:00pm
Miller Campus - MFEC, 107
0 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 6/20/2026.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
0 Seats remaining
|
|
21
IPC 610 Certification
This 30 hour class runs from June 17, 2026 through June 23, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
6 Seats remaining
Advanced Riders Taylorsville
Sunday, 06/21/2026 from 8:00 a.m. to 3:00 p.m.
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot K
11 Seats remaining
Beginning Riders Taylorsville
Daily, starting on Saturday, 06/20/2026 and Sunday, 06/21/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
10 Seats remaining
|
22
IPC 610 Certification
This 30 hour class runs from June 17, 2026 through June 23, 2026. Students will attend class on the first day and then work with instructor to schedule lab times. Office Hours: M-TH 7:00-1:00pm, 3:00-9:00pm
12:00am - 12:00am
Westpointe Center - SSB, 224
6 Seats remaining
Injection Molding Tech I
This 80-hour class will start Monday, June 22 and run until Thursday, July 23rd every Monday through Thursday from 9am to 1pm.
09:00am - 01:00pm
Westpointe Center - WWTE, 109
5 Seats remaining
Advanced SolidWorks Parametric Modeling
Class meets in-person in MFEC 229 every Monday and Wednesday from 5:30pm - 8:30pm, starting 6/22/26 and ending 7/29/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 229
10 Seats remaining
Elementary Methods of Teaching Literacy #1
Course is Hybrid (Online + Webinar). The webinar meetings are every Monday from June 1st to June 29th, 2026, from 5:30pm to 8:30pm. You will have until July 5th, 2026 to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
16 Seats remaining
|
23
Injection Molding Tech I
This 80-hour class will start Monday, June 22 and run until Thursday, July 23rd every Monday through Thursday from 9am to 1pm.
09:00am - 01:00pm
Westpointe Center - WWTE, 109
5 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 6/23/2026.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
0 Seats remaining
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 6/2/26 and ending 7/23/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
9 Seats remaining
Introduction to Excel
The course runs from June 16, 2026 to June 25, 2026. Class will meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Miller Campus in the Miller Professional Development Center, room 118 (LHM-MPDC-118).
05:30pm - 08:30pm
Miller Campus - MPDC, 118
13 Seats remaining
Basic Manufacturing Skills
This course is held on campus, in person at the Miller Campus of SLCC, 9750 S 300 W, Sandy, Ut 84070, Room TBD. There are no books or materials required for this course. There is coursework that is accessed online through Canvas at the following link: slcc.edu https://slcc.instructure.com/login/canvasContact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
06:00pm - 09:00pm
Miller Campus - MPDC, 114
10 Seats remaining
|
24
Injection Molding Tech I
This 80-hour class will start Monday, June 22 and run until Thursday, July 23rd every Monday through Thursday from 9am to 1pm.
09:00am - 01:00pm
Westpointe Center - WWTE, 109
5 Seats remaining
Advanced SolidWorks Parametric Modeling
Class meets in-person in MFEC 229 every Monday and Wednesday from 5:30pm - 8:30pm, starting 6/22/26 and ending 7/29/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 229
10 Seats remaining
|
25
Injection Molding Tech I
This 80-hour class will start Monday, June 22 and run until Thursday, July 23rd every Monday through Thursday from 9am to 1pm.
09:00am - 01:00pm
Westpointe Center - WWTE, 109
5 Seats remaining
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 6/2/26 and ending 7/23/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
9 Seats remaining
Introduction to Excel
The course runs from June 16, 2026 to June 25, 2026. Class will meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Miller Campus in the Miller Professional Development Center, room 118 (LHM-MPDC-118).
05:30pm - 08:30pm
Miller Campus - MPDC, 118
13 Seats remaining
|
26
Beginning Riders Ogden
Daily, starting on Friday, 06/26/2026 and Saturday, 06/27/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Washington Heights Church
9 Seats remaining
Beginning Riders Taylorsville
Weekly, starting on Friday, 06/19/2026 and Friday, 06/26/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
11 Seats remaining
|
27
Beginning Riders Ogden
Daily, starting on Friday, 06/26/2026 and Saturday, 06/27/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Washington Heights Church
9 Seats remaining
Beginning Riders Taylorsville
Daily, starting on Saturday, 06/27/2026 and Sunday, 06/28/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
9 Seats remaining
Experienced Riders Jordan
Saturday 06/27/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Jordan Campus - HTC, Lot J3
10 Seats remaining
UHP Heavy-Duty Safety Inspection
Class is scheduled for June 20 & 27 from 8:00 to 5:00 PM on the Westpointe Campus, 1060 N Flyer Way, Salt Lake City, UT 84116. Class will be held in the Westpointe Workforce Training & Education Center (WWTE) building, Room 159. The entrance is on the north side of the building.
08:00am - 05:00pm
Westpointe Center - WWTE, 159
0 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am-Noon on 6/27/2026.
10:00am - 12:00pm
Miller Campus - MFEC, 107
0 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 6/27/2026.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
0 Seats remaining
|
|
28
Beginning Riders Taylorsville
Daily, starting on Saturday, 06/27/2026 and Sunday, 06/28/2026 from 8:00am to 3:00pm
08:00am - 03:00pm
Taylorsville Redwood Campus - GFSB, Lot J
9 Seats remaining
|
29
Professional Responsibility as an Educator
Course is 100% online, no scheduled meetings. Check for assignments dates in Canvas. Class available from 06/29/2026 to 08/02/2026.
12:00am - 11:59pm
Online
16 Seats remaining
Injection Molding Tech I
This 80-hour class will start Monday, June 22 and run until Thursday, July 23rd every Monday through Thursday from 9am to 1pm.
09:00am - 01:00pm
Westpointe Center - WWTE, 109
5 Seats remaining
Advanced SolidWorks Parametric Modeling
Class meets in-person in MFEC 229 every Monday and Wednesday from 5:30pm - 8:30pm, starting 6/22/26 and ending 7/29/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 229
10 Seats remaining
Basic Computer Skills I: Using the Computer and Internet
This class meets every Monday from 5:30pm to 8:30pm and every Wednesday from 5:30pm to 7:30pm. The class runs from June 29, 2026 to August 5, 2026. The classroom is located at the Salt Lake Community College Taylorsville Redwood Road campus, Construction Trades (CT) building, Room 018E (TRW-CT-018E).
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018E
13 Seats remaining
Elementary Methods of Teaching Literacy #1
Course is Hybrid (Online + Webinar). The webinar meetings are every Monday from June 1st to June 29th, 2026, from 5:30pm to 8:30pm. You will have until July 5th, 2026 to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
16 Seats remaining
|
30
Adapted PE
Classes are from June 30th to August 25th, 2026. Fully online coursework in Canvas. Check dates for assignments.
12:00am - 12:00pm
Online
12 Seats remaining
Cultivating Healthy Relationships
Course is from June 30th, 2026 to August 25th, 2026. Available 100% online, no scheduled meetings. Check for assignments dates in Canvas.
12:00am - 12:00pm
Online
21 Seats remaining
Human Development/Sexuality
Classes are fully online from June 30th to August 25th, 2026. Check dates for assignments.
12:00am - 12:00pm
Online
9 Seats remaining
Methods of Teaching PE
Course is 100% online no scheduled meetings. Check for assignment date in Canvas. Classes are available from June 30th to August 25th, 2026.
12:00am - 12:00pm
Online
12 Seats remaining
Nutrition, Safety, & Disease Prevention
Course is 100% online no scheduled meetings. Check for assignment dates in Canvas. Class is available from June 30th to August 25th, 2026.
12:00am - 12:00pm
Online
10 Seats remaining
Applied Emissions
Course is self-paced and 100% online. You can access content as soon as you are registered. The required 24 hours of training must be completed by June 30, 2026.
08:00am - 08:01am
Online
496 Seats remaining
Basic Computer Skills II: Introduction to Word
The class runs from June 30, 2026 to July 23, 2026 and will meet every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The classroom is located at the Salt Lake Community College Miller campus, Miller Professional Development Center (MPDC) building, Room 118 (Miller-MPDC-118).
09:00am - 12:00pm
Miller Campus - MPDC, 118
13 Seats remaining
Injection Molding Tech I
This 80-hour class will start Monday, June 22 and run until Thursday, July 23rd every Monday through Thursday from 9am to 1pm.
09:00am - 01:00pm
Westpointe Center - WWTE, 109
5 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 6/30/2026.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
0 Seats remaining
Autodesk Revit Comprehensive
This course meets in-person in MFEC 208 every Tuesday and Thursday from 5:30pm - 8:30pm. Starting 6/2/26 and ending 7/23/26.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
9 Seats remaining
Intermediate Excel
The course runs from June 30, 2026 to July 23, 2026. Class will meet in-person on Tuesday and Thursday evenings from 5:30 pm to 8:30 pm at the Miller Campus in the Miller Free Enterprise Center, room 229 (LHM-MFEC-229).
05:30pm - 08:30pm
Miller Campus - MFEC, 229
9 Seats remaining
Basic Manufacturing Skills
This course is held on campus, in person at the Miller Campus of SLCC, 9750 S 300 W, Sandy, Ut 84070, Room TBD. There are no books or materials required for this course. There is coursework that is accessed online through Canvas at the following link: slcc.edu https://slcc.instructure.com/login/canvasContact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
06:00pm - 09:00pm
Miller Campus - MPDC, 114
10 Seats remaining
|
||||
| << Previous Month | Today | Next Month >> | ||||