Cart (0)
Events for the Month of October, 2025
| << Previous Month | Today | Next Month >> | ||||
|
Category
|
||||||
| Sunday | Monday | Tuesday | Wednesday | Thursday | Friday | Saturday |
|---|---|---|---|---|---|---|
|
1
Application for Short Term Intensive Training (STIT) Funding
You may apply for funding in an approved program from 07/01/2025 - 06/30/2026
12:00am - 12:00am
808 Seats remaining
Application for Utah Works Funding
You may apply for funding in an approved program from 07/01/2025 - 06/30/2026
12:00am - 12:00am
987 Seats remaining
Application: Strategic Workforce Initiative (SWI) Funding
You may apply for funding in an approved program from 07/01/2025 - 06/30/2026
12:00am - 12:00am
983 Seats remaining
Introduction to Quality Control ONLINE
Class will run from 10/1/25 through 11/12/25 100% online for 7 weeks. The online classroom is open 24/7 once the course begins. Your instructor will give you instructions through Canvas regarding participation expectations, course logistics, and classroom management.
12:00am - 12:00am
Online
11 Seats remaining
Applied Emissions
Course is self-paced and 100% online. You can access content as soon as you are registered. The required 24 hours of training must be completed by October 31, 2025.
08:00am - 08:01am
Online
499 Seats remaining
HTML & CSS
This course meets Monday and Wednesday, Online via Zoom, from 9:00am - 12:00pm starting 9/10/25 and ending 10/29/25
09:00am - 12:00pm
Online
10 Seats remaining
Methods of Teaching Secondary Special Education Mathematics
Course is hybrid format (Online + Webinar). Meetings are scheduled every Wednesday from September 03rd to October 14th, 2025 from 4:30pm to 7:30 pm. Check for assignment dates in Canvas.
04:30pm - 07:30pm
Online
21 Seats remaining
Adobe Photoshop
This course meets every Monday and Wednesday in the Miller Campus room MPDC 118 from 5:30pm - 8:30pm. Starting 9/15/2025 and Ending 10/15/2025.
05:30pm - 08:30pm
Miller Campus - MPDC, 118
17 Seats remaining
Energy Efficient Lighting
This course is a 16-week synchronous hybrid Canvas course that utilizes in-person in-class sessions, live Zoom webinars, and approximately 12 hours of additional online content in Canvas.**Canvas access is available Tuesday 8/26/2025 through Wednesday 12/10/2025. **Live Zoom Webinars will begin Wednesday 08/27/2025 from 5:30 to 8:30 pm. Participants will access Zoom through Canvas, and will have access to a recording of each session the following week. **Group lighting audit projects and presentations will be conducted in-person in MFEC206.
05:30pm - 08:30pm
Miller Campus - MFEC, 206
24 Seats remaining
Intermediate Excel
Class will meet in-person on Monday and Wednesday evenings from 5:30 pm to 8:30 pm on Miller Campus in the Miller Professional Development Center, room 114 (MPDC 114). The course starts 9/29/25. On 10/20/25 there will be an optional review for the exam. The optional Microsoft Excel Assoicate Exam will be proctored on 10/22/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
14 Seats remaining
UI/UX Design Principles
This course meets Online via Zoom and in CT-018D from 5:30pm - 8:30pm every Monday and Wednesday starting 9/8/25 and ending 10/29/25.
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018D
9 Seats remaining
Introduction to Medical Device Industry
Class will run from 09/17/25 through 10/22/25 for 6 weeks in person on Wednesday evenings from 6:00 pm to 9:00 pm at the Miller Campus, classroom TBD.
06:00pm - 09:00pm
Miller Campus - MCPC, 110
3 Seats remaining
Lineworker Apprenticeship 3A
This is a Hybrid Course with online and in-person lab work.Canvas access is available August 26, 2025, through December 7, 2025.Lab work will be 6pm to 9pm on Wednesdays beginning August 27, 2025, through December 3st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard.Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
11 Seats remaining
Lineworker Apprenticeship 3B
This is a Hybrid Course with online and in-person lab work. Lab work will be 6pm to 9pm on Wednesdays beginning on August 27, 2025 and running through December 3rd at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
15 Seats remaining
Lineworker Apprenticeship 4A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Wednesdays beginning August 27, 2025, through December 3st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
7 Seats remaining
Lineworker Apprenticeship 4B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Wednesdays beginning August 27, 2025, through December 3st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard.Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
15 Seats remaining
|
2
Basic Computer Skills I: Using the Computer and Internet
This class meets every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The class runs from September 9, 2025 to October 16, 2025. The classroom is located at the Taylorsville Redwood Rd. campus, Construction Trades (CT) building, Room 018E (RRW-CT-018E).
09:00am - 12:00pm
Taylorsville Redwood Campus - CT, 018E
9 Seats remaining
WordPress & CMS Fundamentals
This course meets online via Zoom every Tuesday and Thursday from 12:00pm to 3:00pm starting 9/30/25 and ending 10/23/25.
12:00pm - 03:00pm
Online
10 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
9 Seats remaining
Elementary Methods of Teaching Mathematics
Course is Hybrid (Online + Webinar). The webinar meetings are every Thursday from 09/04/2025 to 10/16/2025, from 5:30pm to 8:30pm. You will have until October 22th to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
15 Seats remaining
QuickBooks Essentials
This course meets in-person on Thursday evenings beginning on 10/2/25. On Thusday, 11/13/25 there will be an optional review session from 5:30pm - 8:30pm. The optional QuickBooks Certified User Exam will be proctored in-person on Tuesday, 11/20/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 118
16 Seats remaining
|
3
Lineworker 4
This is the 4th and final Lineworker lab course. This is a Hybrid Course with online and in-person lab work. Canvas access is available September 5, 2025, through October 31, 2025. Lab work will be 7am to 5:30pm on Fridays beginning September 12, 2025, through October 31, 2025, at either SLCC Miller Pole Yard, MCPC-123, or pre-determined industry partner locations. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
07:00am - 05:30pm
Miller Campus - MCPC, 123
25 Seats remaining
Meter Apprenticeship 3A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 8am to 5:30pm on Fridays beginning August 29, 2025 through December 5th, 2025, at either SLCC Miller Pole Yard, MCPC-120-A or an industry training partner. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
23 Seats remaining
|
4
UHP Light-Duty Safety Inspection
Class is held on October 4 & 11 from 8:00 to 4:30 PM on the Miller Campus, 9750 South 300 West, Miller Free Enterprise Center (MFEC) Bldg. #3, Room 113.
08:00am - 04:30pm
Miller Campus - MFEC, 113
6 Seats remaining
International Residential Code - 6 hours
Class takes place in-person from 9am -4pm on Saturday, October 4, 2025 with 1-hour break for lunch at noon at JHS181 on the Jordan Campus, 3491 W 9000 S, West Jordan, UT 84088. Course fulfills 6 hour DOPL requirement for contractors, including 3 hours of residential code and 1 hour of Energy Conservation credit.
09:00am - 04:00pm
Jordan Campus - JHS 181
247 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am - Noon on 10/04/2025.
10:00am - 12:00pm
Miller Campus - MFEC, 107
0 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 10/04/2025.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
0 Seats remaining
|
|||
|
5
|
6
HTML & CSS
This course meets Monday and Wednesday, Online via Zoom, from 9:00am - 12:00pm starting 9/10/25 and ending 10/29/25
09:00am - 12:00pm
Online
10 Seats remaining
Adobe Photoshop
This course meets every Monday and Wednesday in the Miller Campus room MPDC 118 from 5:30pm - 8:30pm. Starting 9/15/2025 and Ending 10/15/2025.
05:30pm - 08:30pm
Miller Campus - MPDC, 118
17 Seats remaining
Basic Computer Skills I: Using the Computer and Internet
This class meets every Monday from 5:30 PM to 8:30 PM and every Wednesday from 5:30 PM to 7:30 PM. The class runs from October 6, 2025 to November 12, 2025. The classroom is located at the West Valley Center (WVLC) campus, Room 122 (WVLC-122).
05:30pm - 08:30pm
West Valley Center - WVLC, 122
13 Seats remaining
Intermediate Excel
Class will meet in-person on Monday and Wednesday evenings from 5:30 pm to 8:30 pm on Miller Campus in the Miller Professional Development Center, room 114 (MPDC 114). The course starts 9/29/25. On 10/20/25 there will be an optional review for the exam. The optional Microsoft Excel Assoicate Exam will be proctored on 10/22/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
14 Seats remaining
UI/UX Design Principles
This course meets Online via Zoom and in CT-018D from 5:30pm - 8:30pm every Monday and Wednesday starting 9/8/25 and ending 10/29/25.
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018D
9 Seats remaining
Lineworker Apprenticeship 1A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Mondays beginning September 8, 2025, through December 1st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
12 Seats remaining
Lineworker Apprenticeship 1B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Mondays beginning September 8, 2025, through December 1st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
10 Seats remaining
Lineworker Apprenticeship 2A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Mondays beginning September 8, 2025, through December 1st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
15 Seats remaining
Lineworker Apprenticeship 2B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Mondays beginning September 8, 2025, through December 1st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
14 Seats remaining
|
7
Basic Computer Skills I: Using the Computer and Internet
This class meets every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The class runs from September 9, 2025 to October 16, 2025. The classroom is located at the Taylorsville Redwood Rd. campus, Construction Trades (CT) building, Room 018E (RRW-CT-018E).
09:00am - 12:00pm
Taylorsville Redwood Campus - CT, 018E
9 Seats remaining
WordPress & CMS Fundamentals
This course meets online via Zoom every Tuesday and Thursday from 12:00pm to 3:00pm starting 9/30/25 and ending 10/23/25.
12:00pm - 03:00pm
Online
10 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
9 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 10/07/2025.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
0 Seats remaining
Elementary Methods of Teaching Fine Arts
Course is fully Online from 09/09/2025 to 10/07/2025. Webinar meetings scheduled every Tuesday from 5:30pm to 7:30pm. Check for assignments' dates in Canvas.
05:30pm - 07:30pm
Online
23 Seats remaining
HTML & CSS
This course meets Tuesday and Thursdays from 5:30pm - 8:30pm starting 10/7/25 and ending 11/25/25.
05:30pm - 08:30pm
Online
10 Seats remaining
Building Automation Systems Fundamentals
WTBA 140 is the first of 4 courses that comprise SLCC's Level 1 BAS certificate. It meets Tuesdays nights from 6-7pm in MCPC 123 on the Miller Campus in Sandy from 8/26/25 to 12/02/25. The other courses are: WTBA 150 Basic Electrical Concepts, and WTBA 160 Devices & Control Theory. These 3 classes are taken concurrently in the first 15 weeks of Spring 2025 semester. The other class is WTBA 170, BAS Fire & Alarm.
06:00pm - 07:00pm
Miller Campus - MCPC, 123
2 Seats remaining
Building Automation Systems Devices and Control Theory
System Description : WTBA 160 is the third of 4 courses that comprise SLCC's Level 1 BAS certificate. It meets Tuesdays nights from 7-9:30pm in MCPC 123 on the Miller Campus in Sandy from 8/26/25 to 12/2/25. The other courses are: WTBA 150 Basic Electrical Concepts, and WTBA 160 Devices & Control Theory. These 3 classes are taken concurrently in the first 15 weeks of Fa;; 2025 semester. The other class is WTBA 170, Fire & Alarm, which runs for 15 weeks starting Spring 2026.
07:00pm - 09:30pm
Miller Campus - MCPC, 123
3 Seats remaining
|
8
Introduction to Quality Control ONLINE
Class will run from 10/1/25 through 11/12/25 100% online for 7 weeks. The online classroom is open 24/7 once the course begins. Your instructor will give you instructions through Canvas regarding participation expectations, course logistics, and classroom management.
12:00am - 12:00am
Online
11 Seats remaining
HTML & CSS
This course meets Monday and Wednesday, Online via Zoom, from 9:00am - 12:00pm starting 9/10/25 and ending 10/29/25
09:00am - 12:00pm
Online
10 Seats remaining
Methods of Teaching Secondary Special Education Mathematics
Course is hybrid format (Online + Webinar). Meetings are scheduled every Wednesday from September 03rd to October 14th, 2025 from 4:30pm to 7:30 pm. Check for assignment dates in Canvas.
04:30pm - 07:30pm
Online
21 Seats remaining
Adobe Photoshop
This course meets every Monday and Wednesday in the Miller Campus room MPDC 118 from 5:30pm - 8:30pm. Starting 9/15/2025 and Ending 10/15/2025.
05:30pm - 08:30pm
Miller Campus - MPDC, 118
17 Seats remaining
Basic Computer Skills I: Using the Computer and Internet
This class meets every Monday from 5:30 PM to 8:30 PM and every Wednesday from 5:30 PM to 7:30 PM. The class runs from October 6, 2025 to November 12, 2025. The classroom is located at the West Valley Center (WVLC) campus, Room 122 (WVLC-122).
05:30pm - 08:30pm
West Valley Center - WVLC, 122
13 Seats remaining
Energy Efficient Lighting
This course is a 16-week synchronous hybrid Canvas course that utilizes in-person in-class sessions, live Zoom webinars, and approximately 12 hours of additional online content in Canvas.**Canvas access is available Tuesday 8/26/2025 through Wednesday 12/10/2025. **Live Zoom Webinars will begin Wednesday 08/27/2025 from 5:30 to 8:30 pm. Participants will access Zoom through Canvas, and will have access to a recording of each session the following week. **Group lighting audit projects and presentations will be conducted in-person in MFEC206.
05:30pm - 08:30pm
Miller Campus - MFEC, 206
24 Seats remaining
Intermediate Excel
Class will meet in-person on Monday and Wednesday evenings from 5:30 pm to 8:30 pm on Miller Campus in the Miller Professional Development Center, room 114 (MPDC 114). The course starts 9/29/25. On 10/20/25 there will be an optional review for the exam. The optional Microsoft Excel Assoicate Exam will be proctored on 10/22/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
14 Seats remaining
UI/UX Design Principles
This course meets Online via Zoom and in CT-018D from 5:30pm - 8:30pm every Monday and Wednesday starting 9/8/25 and ending 10/29/25.
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018D
9 Seats remaining
Basic Electricity for the Power Industry
This is a Hybrid Course with online and in-person lab work runs from 10/08/2025 to 12/11/2025. Lab work will be 6-9pm on Monday, Wednesday, and Thursday at SLCC Miller Campus MCPC-120A. Please watch for communication in Canvas, from the program manager, and from the instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
19 Seats remaining
Introduction to Medical Device Industry
Class will run from 09/17/25 through 10/22/25 for 6 weeks in person on Wednesday evenings from 6:00 pm to 9:00 pm at the Miller Campus, classroom TBD.
06:00pm - 09:00pm
Miller Campus - MCPC, 110
3 Seats remaining
Lineworker Apprenticeship 3A
This is a Hybrid Course with online and in-person lab work.Canvas access is available August 26, 2025, through December 7, 2025.Lab work will be 6pm to 9pm on Wednesdays beginning August 27, 2025, through December 3st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard.Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
11 Seats remaining
Lineworker Apprenticeship 3B
This is a Hybrid Course with online and in-person lab work. Lab work will be 6pm to 9pm on Wednesdays beginning on August 27, 2025 and running through December 3rd at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
15 Seats remaining
Lineworker Apprenticeship 4A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Wednesdays beginning August 27, 2025, through December 3st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
7 Seats remaining
Lineworker Apprenticeship 4B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Wednesdays beginning August 27, 2025, through December 3st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard.Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
15 Seats remaining
|
9
Basic Computer Skills I: Using the Computer and Internet
This class meets every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The class runs from September 9, 2025 to October 16, 2025. The classroom is located at the Taylorsville Redwood Rd. campus, Construction Trades (CT) building, Room 018E (RRW-CT-018E).
09:00am - 12:00pm
Taylorsville Redwood Campus - CT, 018E
9 Seats remaining
WordPress & CMS Fundamentals
This course meets online via Zoom every Tuesday and Thursday from 12:00pm to 3:00pm starting 9/30/25 and ending 10/23/25.
12:00pm - 03:00pm
Online
10 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
9 Seats remaining
Elementary Methods of Teaching Mathematics
Course is Hybrid (Online + Webinar). The webinar meetings are every Thursday from 09/04/2025 to 10/16/2025, from 5:30pm to 8:30pm. You will have until October 22th to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
15 Seats remaining
HTML & CSS
This course meets Tuesday and Thursdays from 5:30pm - 8:30pm starting 10/7/25 and ending 11/25/25.
05:30pm - 08:30pm
Online
10 Seats remaining
QuickBooks Essentials
This course meets in-person on Thursday evenings beginning on 10/2/25. On Thusday, 11/13/25 there will be an optional review session from 5:30pm - 8:30pm. The optional QuickBooks Certified User Exam will be proctored in-person on Tuesday, 11/20/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 118
16 Seats remaining
Basic Electricity for the Power Industry
This is a Hybrid Course with online and in-person lab work runs from 10/08/2025 to 12/11/2025. Lab work will be 6-9pm on Monday, Wednesday, and Thursday at SLCC Miller Campus MCPC-120A. Please watch for communication in Canvas, from the program manager, and from the instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
19 Seats remaining
Basic Manufacturing Skills
Class will run from 10/9/25 through 11/20/25 in person on Thursday evenings from 6:00 pm to 9:00 pm for 7 weeks at the Miller Campus, classroom TBD.
06:00pm - 09:00pm
Miller Campus - MPDC, 114
8 Seats remaining
|
10
Lineworker 4
This is the 4th and final Lineworker lab course. This is a Hybrid Course with online and in-person lab work. Canvas access is available September 5, 2025, through October 31, 2025. Lab work will be 7am to 5:30pm on Fridays beginning September 12, 2025, through October 31, 2025, at either SLCC Miller Pole Yard, MCPC-123, or pre-determined industry partner locations. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
07:00am - 05:30pm
Miller Campus - MCPC, 123
25 Seats remaining
Substation Apprenticeship 4B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 7am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
07:00am - 05:30pm
Miller Campus - MCPC, 122
23 Seats remaining
Meter Apprenticeship 1A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
24 Seats remaining
Meter Apprenticeship 1B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
25 Seats remaining
Meter Apprenticeship 2A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
22 Seats remaining
Meter Apprenticeship 3A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 8am to 5:30pm on Fridays beginning August 29, 2025 through December 5th, 2025, at either SLCC Miller Pole Yard, MCPC-120-A or an industry training partner. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
23 Seats remaining
Meter Apprenticeship 3B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
23 Seats remaining
Meter Apprenticeship 4A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
25 Seats remaining
Substation Apprenticeship 1A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 123
24 Seats remaining
Substation Apprenticeship 1B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 123
23 Seats remaining
Substation Apprenticeship 2A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 123
18 Seats remaining
Substation Apprenticeship 2B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 123
26 Seats remaining
Substation Apprenticeship 3A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 123
24 Seats remaining
Substation Apprenticeship 3B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 123
20 Seats remaining
Substation Apprenticeship 4A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 123
24 Seats remaining
Utah Notary Training Workshop
Course Date: 10/10/25 from 11 am to 4 pm; You DO NOT have to set up a Canvas account. IGNORE those instructions at the bottom of this confirmation. The Utah Notary Public Training Workshop is a one-time, 5-hour workshop designed to prepare students to take the Utah State Notary Public online course. There are no follow-up workshops and SLCC does not administer the exam.
11:00am - 04:00pm
Miller Campus - MFEC, 206
18 Seats remaining
|
11
UHP Light-Duty Safety Inspection
Class is held on October 4 & 11 from 8:00 to 4:30 PM on the Miller Campus, 9750 South 300 West, Miller Free Enterprise Center (MFEC) Bldg. #3, Room 113.
08:00am - 04:30pm
Miller Campus - MFEC, 113
6 Seats remaining
International Residential Code - 6 hours
Class takes place in-person from 9am -4pm on Saturday, October11, 2025 with 1-hour break for lunch at noon at JHS181 on the Jordan Campus, 3491 W 9000 S, West Jordan, UT 84088. Course fulfills 6 hour DOPL requirement for contractors, including 3 hours of residential code and 1 hour of Energy Conservation credit.
09:00am - 04:00pm
Jordan Campus - JHS 181
247 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am - Noon on 10/11/2025.
10:00am - 12:00pm
Miller Campus - MFEC, 107
2 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 10/11/2025.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
4 Seats remaining
|
|
12
|
13
Elementary Methods of Teaching Health
Course is fully Online from 09/09/2025 to 10/13/2025. No meetings scheduled. Check for assignments' dates in Canvas.
12:00am - 11:59pm
Online
24 Seats remaining
Professional Responsibility as an Educator
Course is 100% online, no scheduled meetings. Check for assignments dates in Canvas. Class available from 10/13/2025 to 11/10/2025.
12:00am - 11:59pm
Online
22 Seats remaining
HTML & CSS
This course meets Monday and Wednesday, Online via Zoom, from 9:00am - 12:00pm starting 9/10/25 and ending 10/29/25
09:00am - 12:00pm
Online
10 Seats remaining
Adobe Photoshop
This course meets every Monday and Wednesday in the Miller Campus room MPDC 118 from 5:30pm - 8:30pm. Starting 9/15/2025 and Ending 10/15/2025.
05:30pm - 08:30pm
Miller Campus - MPDC, 118
17 Seats remaining
Basic Computer Skills I: Using the Computer and Internet
This class meets every Monday from 5:30 PM to 8:30 PM and every Wednesday from 5:30 PM to 7:30 PM. The class runs from October 6, 2025 to November 12, 2025. The classroom is located at the West Valley Center (WVLC) campus, Room 122 (WVLC-122).
05:30pm - 08:30pm
West Valley Center - WVLC, 122
13 Seats remaining
Intermediate Excel
Class will meet in-person on Monday and Wednesday evenings from 5:30 pm to 8:30 pm on Miller Campus in the Miller Professional Development Center, room 114 (MPDC 114). The course starts 9/29/25. On 10/20/25 there will be an optional review for the exam. The optional Microsoft Excel Assoicate Exam will be proctored on 10/22/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
14 Seats remaining
UI/UX Design Principles
This course meets Online via Zoom and in CT-018D from 5:30pm - 8:30pm every Monday and Wednesday starting 9/8/25 and ending 10/29/25.
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018D
9 Seats remaining
Basic Electricity for the Power Industry
This is a Hybrid Course with online and in-person lab work runs from 10/08/2025 to 12/11/2025. Lab work will be 6-9pm on Monday, Wednesday, and Thursday at SLCC Miller Campus MCPC-120A. Please watch for communication in Canvas, from the program manager, and from the instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
19 Seats remaining
|
14
Genealogy and Family History Writing
Course Dates: 10/14/25 through 12/9/25 (skip 11/26/25): The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
10 Seats remaining
Genealogy-Writing Life Stories
Course Dates: 10/14/25 through 12/9/25 (skip 11/25/25); The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas ?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
9 Seats remaining
Genetic Genealogy
Course Dates: 10/14/25 through 12/9/25 (skip 11/26); The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas? Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
8 Seats remaining
Intro to High-Tech Genealogy
Course Dates: 10/14/25 through 12/9/25 (skip 11/25/25); The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
10 Seats remaining
U.S. Genealogy Research I
Course Dates: 10/14/25 through 12/12/25; The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
9 Seats remaining
Basic Computer Skills I: Using the Computer and Internet
This class meets every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The class runs from September 9, 2025 to October 16, 2025. The classroom is located at the Taylorsville Redwood Rd. campus, Construction Trades (CT) building, Room 018E (RRW-CT-018E).
09:00am - 12:00pm
Taylorsville Redwood Campus - CT, 018E
9 Seats remaining
WordPress & CMS Fundamentals
This course meets online via Zoom every Tuesday and Thursday from 12:00pm to 3:00pm starting 9/30/25 and ending 10/23/25.
12:00pm - 03:00pm
Online
10 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
9 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 10/14/2025.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
1 Seats remaining
Elementary Methods of Teaching Science
Course is Hybrid (Online + Webinar). The webinar meetings are every Tuesday from 10/14/2025 to 11/25/2025, from 4:30pm to 7:30pm. You will have until December 1st to complete your course work. Check for assignments' dates in Canvas.
04:30pm - 07:30pm
Online
22 Seats remaining
AutoCAD Civil 3D
Class meets in-person every Tuesday and Thursday starting 10/14/25 and ending 11/20/25. Access to Canvas begins 10/7/25.
05:30pm - 08:30pm
Miller Campus - MCPC, 108
10 Seats remaining
HTML & CSS
This course meets Tuesday and Thursdays from 5:30pm - 8:30pm starting 10/7/25 and ending 11/25/25.
05:30pm - 08:30pm
Online
10 Seats remaining
Building Automation Systems Fundamentals
WTBA 140 is the first of 4 courses that comprise SLCC's Level 1 BAS certificate. It meets Tuesdays nights from 6-7pm in MCPC 123 on the Miller Campus in Sandy from 8/26/25 to 12/02/25. The other courses are: WTBA 150 Basic Electrical Concepts, and WTBA 160 Devices & Control Theory. These 3 classes are taken concurrently in the first 15 weeks of Spring 2025 semester. The other class is WTBA 170, BAS Fire & Alarm.
06:00pm - 07:00pm
Miller Campus - MCPC, 123
2 Seats remaining
Building Automation Systems Devices and Control Theory
System Description : WTBA 160 is the third of 4 courses that comprise SLCC's Level 1 BAS certificate. It meets Tuesdays nights from 7-9:30pm in MCPC 123 on the Miller Campus in Sandy from 8/26/25 to 12/2/25. The other courses are: WTBA 150 Basic Electrical Concepts, and WTBA 160 Devices & Control Theory. These 3 classes are taken concurrently in the first 15 weeks of Fa;; 2025 semester. The other class is WTBA 170, Fire & Alarm, which runs for 15 weeks starting Spring 2026.
07:00pm - 09:30pm
Miller Campus - MCPC, 123
3 Seats remaining
|
15
Intro to Positive Psychology
Course is 100% online no scheduled meetings. Check for assignments dates in Canvas. Classes are from August 26th to October 15th, 2025.
12:00am - 12:00pm
Online
17 Seats remaining
Introduction to Quality Control ONLINE
Class will run from 10/1/25 through 11/12/25 100% online for 7 weeks. The online classroom is open 24/7 once the course begins. Your instructor will give you instructions through Canvas regarding participation expectations, course logistics, and classroom management.
12:00am - 12:00am
Online
11 Seats remaining
Kinesiology for Activity
Classes start August 26th, 2025 to October 15th, 2025. Fully Online Coursework in Canvas. Check dates for assignments.
12:00am - 12:00pm
Online
11 Seats remaining
Mental Health and Substance Abuse Prevention
Classes are from August 26th to October 15th, 2025. Fully Online coursework in Canvas. Check dates for assignments.
12:00am - 12:00pm
Online
13 Seats remaining
Methods of Teaching Fitness for Life
Classes start August 26th, 2025 to October 15th, 2025. Fully Online Coursework in Canvas. Please check dates for assignments.
12:00am - 12:00pm
Online
5 Seats remaining
Methods of Teaching Health
Course is 100% online no scheduled meetings. Check for assignments dates in Canvas. Class available from August 26th to October 15th, 2025.
12:00am - 12:00pm
Online
10 Seats remaining
HTML & CSS
This course meets Monday and Wednesday, Online via Zoom, from 9:00am - 12:00pm starting 9/10/25 and ending 10/29/25
09:00am - 12:00pm
Online
10 Seats remaining
Adobe Photoshop
This course meets every Monday and Wednesday in the Miller Campus room MPDC 118 from 5:30pm - 8:30pm. Starting 9/15/2025 and Ending 10/15/2025.
05:30pm - 08:30pm
Miller Campus - MPDC, 118
17 Seats remaining
Basic Computer Skills I: Using the Computer and Internet
This class meets every Monday from 5:30 PM to 8:30 PM and every Wednesday from 5:30 PM to 7:30 PM. The class runs from October 6, 2025 to November 12, 2025. The classroom is located at the West Valley Center (WVLC) campus, Room 122 (WVLC-122).
05:30pm - 08:30pm
West Valley Center - WVLC, 122
13 Seats remaining
Energy Efficient Lighting
This course is a 16-week synchronous hybrid Canvas course that utilizes in-person in-class sessions, live Zoom webinars, and approximately 12 hours of additional online content in Canvas.**Canvas access is available Tuesday 8/26/2025 through Wednesday 12/10/2025. **Live Zoom Webinars will begin Wednesday 08/27/2025 from 5:30 to 8:30 pm. Participants will access Zoom through Canvas, and will have access to a recording of each session the following week. **Group lighting audit projects and presentations will be conducted in-person in MFEC206.
05:30pm - 08:30pm
Miller Campus - MFEC, 206
24 Seats remaining
Intermediate Excel
Class will meet in-person on Monday and Wednesday evenings from 5:30 pm to 8:30 pm on Miller Campus in the Miller Professional Development Center, room 114 (MPDC 114). The course starts 9/29/25. On 10/20/25 there will be an optional review for the exam. The optional Microsoft Excel Assoicate Exam will be proctored on 10/22/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
14 Seats remaining
UI/UX Design Principles
This course meets Online via Zoom and in CT-018D from 5:30pm - 8:30pm every Monday and Wednesday starting 9/8/25 and ending 10/29/25.
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018D
9 Seats remaining
Basic Electricity for the Power Industry
This is a Hybrid Course with online and in-person lab work runs from 10/08/2025 to 12/11/2025. Lab work will be 6-9pm on Monday, Wednesday, and Thursday at SLCC Miller Campus MCPC-120A. Please watch for communication in Canvas, from the program manager, and from the instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
19 Seats remaining
Introduction to Medical Device Industry
Class will run from 09/17/25 through 10/22/25 for 6 weeks in person on Wednesday evenings from 6:00 pm to 9:00 pm at the Miller Campus, classroom TBD.
06:00pm - 09:00pm
Miller Campus - MCPC, 110
3 Seats remaining
Lineworker Apprenticeship 3A
This is a Hybrid Course with online and in-person lab work.Canvas access is available August 26, 2025, through December 7, 2025.Lab work will be 6pm to 9pm on Wednesdays beginning August 27, 2025, through December 3st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard.Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
11 Seats remaining
Lineworker Apprenticeship 3B
This is a Hybrid Course with online and in-person lab work. Lab work will be 6pm to 9pm on Wednesdays beginning on August 27, 2025 and running through December 3rd at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
15 Seats remaining
Lineworker Apprenticeship 4A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Wednesdays beginning August 27, 2025, through December 3st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
7 Seats remaining
Lineworker Apprenticeship 4B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Wednesdays beginning August 27, 2025, through December 3st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard.Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
15 Seats remaining
|
16
Basic Computer Skills I: Using the Computer and Internet
This class meets every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The class runs from September 9, 2025 to October 16, 2025. The classroom is located at the Taylorsville Redwood Rd. campus, Construction Trades (CT) building, Room 018E (RRW-CT-018E).
09:00am - 12:00pm
Taylorsville Redwood Campus - CT, 018E
9 Seats remaining
WordPress & CMS Fundamentals
This course meets online via Zoom every Tuesday and Thursday from 12:00pm to 3:00pm starting 9/30/25 and ending 10/23/25.
12:00pm - 03:00pm
Online
10 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
9 Seats remaining
AutoCAD Civil 3D
Class meets in-person every Tuesday and Thursday starting 10/14/25 and ending 11/20/25. Access to Canvas begins 10/7/25.
05:30pm - 08:30pm
Miller Campus - MCPC, 108
10 Seats remaining
Elementary Methods of Teaching Mathematics
Course is Hybrid (Online + Webinar). The webinar meetings are every Thursday from 09/04/2025 to 10/16/2025, from 5:30pm to 8:30pm. You will have until October 22th to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
15 Seats remaining
HTML & CSS
This course meets Tuesday and Thursdays from 5:30pm - 8:30pm starting 10/7/25 and ending 11/25/25.
05:30pm - 08:30pm
Online
10 Seats remaining
QuickBooks Essentials
This course meets in-person on Thursday evenings beginning on 10/2/25. On Thusday, 11/13/25 there will be an optional review session from 5:30pm - 8:30pm. The optional QuickBooks Certified User Exam will be proctored in-person on Tuesday, 11/20/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 118
16 Seats remaining
Basic Electricity for the Power Industry
This is a Hybrid Course with online and in-person lab work runs from 10/08/2025 to 12/11/2025. Lab work will be 6-9pm on Monday, Wednesday, and Thursday at SLCC Miller Campus MCPC-120A. Please watch for communication in Canvas, from the program manager, and from the instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
19 Seats remaining
Basic Manufacturing Skills
Class will run from 10/9/25 through 11/20/25 in person on Thursday evenings from 6:00 pm to 9:00 pm for 7 weeks at the Miller Campus, classroom TBD.
06:00pm - 09:00pm
Miller Campus - MPDC, 114
8 Seats remaining
|
17
Lineworker 4
This is the 4th and final Lineworker lab course. This is a Hybrid Course with online and in-person lab work. Canvas access is available September 5, 2025, through October 31, 2025. Lab work will be 7am to 5:30pm on Fridays beginning September 12, 2025, through October 31, 2025, at either SLCC Miller Pole Yard, MCPC-123, or pre-determined industry partner locations. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
07:00am - 05:30pm
Miller Campus - MCPC, 123
25 Seats remaining
Meter Apprenticeship 3A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 8am to 5:30pm on Fridays beginning August 29, 2025 through December 5th, 2025, at either SLCC Miller Pole Yard, MCPC-120-A or an industry training partner. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
23 Seats remaining
|
18
UHP Heavy-Duty Safety Inspection
Class is scheduled for October 18 & 25 from 8:00 to 5:00 PM on the Westpointe Campus, 1060 N Flyer Way, Salt Lake City, UT 84116. Class will be held in the Westpointe Workforce Training & Education Center (WWTE) building, Room 159. The entrance is on the north side of the building.
08:00am - 05:00pm
Westpointe Center - WWTE, 159
21 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am - Noon on 10/18/2025.
10:00am - 12:00pm
Miller Campus - MFEC, 107
4 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 10/18/2025.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
4 Seats remaining
|
|
19
|
20
Adapted PE
Classes are from October 20th to December 11th, 2025. Fully online coursework in Canvas. Check dates for assignments.
12:00am - 12:00pm
Online
17 Seats remaining
Creative Problem Solving-Personal/Professional
Course is fully Online from 10/20/2025 to 12/11/2025. No scheduled meetings. Check for assignments' dates in Canvas.
12:00am - 11:59pm
Online
23 Seats remaining
Emotional Intelligence
Course is 100% online no scheduled meetings. Check for assignments dates in Canvas. Class available from October 20 to December 11th, 2025.
12:00am - 12:00pm
Online
23 Seats remaining
Human Development/Sexuality
Classes are fully online from October 20th to December 11th, 2025. Check dates for assignments.
12:00am - 12:00pm
Online
22 Seats remaining
Methods of Teaching PE
Course is 100% online no scheduled meetings. Check for assignment date in Canvas. Classes are available from October 20th to December 11th, 2025.
12:00am - 12:00pm
Online
15 Seats remaining
Mindfulness & Stress Management
Course is 100% online no scheduled meetings. Check for assignment date in Canvas. Class available from October 20th to December 11th, 2025.
12:00am - 12:00pm
Online
23 Seats remaining
Nutrition, Safety, & Disease Prevention
Course is 100% online no scheduled meetings. Check for assignment dates in Canvas. Class is available from October 20th to December 11th, 2025.
12:00am - 12:00pm
Online
21 Seats remaining
Post Traumatic Growth and Resilience
Course is 100% online no scheduled meetings. Check for assignment due dates in Canvas. Class available from October 20th to December 11th, 2025.
12:00am - 12:00pm
Online
24 Seats remaining
HTML & CSS
This course meets Monday and Wednesday, Online via Zoom, from 9:00am - 12:00pm starting 9/10/25 and ending 10/29/25
09:00am - 12:00pm
Online
10 Seats remaining
Basic Computer Skills I: Using the Computer and Internet
This class meets every Monday from 5:30 PM to 8:30 PM and every Wednesday from 5:30 PM to 7:30 PM. The class runs from October 6, 2025 to November 12, 2025. The classroom is located at the West Valley Center (WVLC) campus, Room 122 (WVLC-122).
05:30pm - 08:30pm
West Valley Center - WVLC, 122
13 Seats remaining
Intermediate Excel
Class will meet in-person on Monday and Wednesday evenings from 5:30 pm to 8:30 pm on Miller Campus in the Miller Professional Development Center, room 114 (MPDC 114). The course starts 9/29/25. On 10/20/25 there will be an optional review for the exam. The optional Microsoft Excel Assoicate Exam will be proctored on 10/22/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
14 Seats remaining
SolidWorks Essentials
Class meets online via Zoom starting 10/20/25 and ending 12/15/25. Access to Canvas begins 10/13/25. No class 11/26 in observance of Thanksgiving.
05:30pm - 08:30pm
Online
7 Seats remaining
UI/UX Design Principles
This course meets Online via Zoom and in CT-018D from 5:30pm - 8:30pm every Monday and Wednesday starting 9/8/25 and ending 10/29/25.
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018D
9 Seats remaining
Basic Electricity for the Power Industry
This is a Hybrid Course with online and in-person lab work runs from 10/08/2025 to 12/11/2025. Lab work will be 6-9pm on Monday, Wednesday, and Thursday at SLCC Miller Campus MCPC-120A. Please watch for communication in Canvas, from the program manager, and from the instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
19 Seats remaining
Lineworker Apprenticeship 1A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Mondays beginning September 8, 2025, through December 1st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
12 Seats remaining
Lineworker Apprenticeship 1B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Mondays beginning September 8, 2025, through December 1st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
10 Seats remaining
Lineworker Apprenticeship 2A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Mondays beginning September 8, 2025, through December 1st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
15 Seats remaining
Lineworker Apprenticeship 2B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Mondays beginning September 8, 2025, through December 1st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
14 Seats remaining
|
21
Instructional Clarity for Effective Teaching
Course is 100% online, no scheduled meetings. Check for assignments dates in Canvas. Class available from 10/21/2025 to 12/08/2025.
12:00am - 11:59pm
Online
21 Seats remaining
U.S. Genealogy Research I
Course Dates: 10/14/25 through 12/12/25; The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
9 Seats remaining
Basic Computer Skills II: Introduction to Word
This class meets every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The class runs from October 21, 2025 to November 13, 2025. The classroom is located at the Taylorsville Redwood Rd. campus, Construction Trades (CT) building, Room 018E (RRW-CT-018E).
09:00am - 12:00pm
Taylorsville Redwood Campus - CT, 018E
12 Seats remaining
WordPress & CMS Fundamentals
This course meets online via Zoom every Tuesday and Thursday from 12:00pm to 3:00pm starting 9/30/25 and ending 10/23/25.
12:00pm - 03:00pm
Online
10 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
9 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 10/21/2025.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
4 Seats remaining
Elementary Methods of Teaching Science
Course is Hybrid (Online + Webinar). The webinar meetings are every Tuesday from 10/14/2025 to 11/25/2025, from 4:30pm to 7:30pm. You will have until December 1st to complete your course work. Check for assignments' dates in Canvas.
04:30pm - 07:30pm
Online
22 Seats remaining
AutoCAD Civil 3D
Class meets in-person every Tuesday and Thursday starting 10/14/25 and ending 11/20/25. Access to Canvas begins 10/7/25.
05:30pm - 08:30pm
Miller Campus - MCPC, 108
10 Seats remaining
Autodesk Revit Comprehensive
This course meets in-person Tuesdays and Thursdays, starting 10/21/25 and ending 12/16/25. Access to Canvas begins 10/14/25. No class 11/27/25 in observance of Thanksgiving.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
14 Seats remaining
Elementary Methods of Teaching Literacy #2
Course is Hybrid (Online + Webinar). The webinar meetings are every Tuesday from 10/21/2025 to 12/02/2025, from 5:30pm to 8:30pm. You will have until December 8th to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
24 Seats remaining
HTML & CSS
This course meets Tuesday and Thursdays from 5:30pm - 8:30pm starting 10/7/25 and ending 11/25/25.
05:30pm - 08:30pm
Online
10 Seats remaining
Building Automation Systems Fundamentals
WTBA 140 is the first of 4 courses that comprise SLCC's Level 1 BAS certificate. It meets Tuesdays nights from 6-7pm in MCPC 123 on the Miller Campus in Sandy from 8/26/25 to 12/02/25. The other courses are: WTBA 150 Basic Electrical Concepts, and WTBA 160 Devices & Control Theory. These 3 classes are taken concurrently in the first 15 weeks of Spring 2025 semester. The other class is WTBA 170, BAS Fire & Alarm.
06:00pm - 07:00pm
Miller Campus - MCPC, 123
2 Seats remaining
Building Automation Systems Devices and Control Theory
System Description : WTBA 160 is the third of 4 courses that comprise SLCC's Level 1 BAS certificate. It meets Tuesdays nights from 7-9:30pm in MCPC 123 on the Miller Campus in Sandy from 8/26/25 to 12/2/25. The other courses are: WTBA 150 Basic Electrical Concepts, and WTBA 160 Devices & Control Theory. These 3 classes are taken concurrently in the first 15 weeks of Fa;; 2025 semester. The other class is WTBA 170, Fire & Alarm, which runs for 15 weeks starting Spring 2026.
07:00pm - 09:30pm
Miller Campus - MCPC, 123
3 Seats remaining
|
22
Introduction to Quality Control ONLINE
Class will run from 10/1/25 through 11/12/25 100% online for 7 weeks. The online classroom is open 24/7 once the course begins. Your instructor will give you instructions through Canvas regarding participation expectations, course logistics, and classroom management.
12:00am - 12:00am
Online
11 Seats remaining
HTML & CSS
This course meets Monday and Wednesday, Online via Zoom, from 9:00am - 12:00pm starting 9/10/25 and ending 10/29/25
09:00am - 12:00pm
Online
10 Seats remaining
Instructional Practices that Promote Student Learning
Course is hybrid format (Online + Webinar). Meeting are scheduled every Wednesday from October 22th to November 19th, 2025 from 4:30pm to 7:30pm. Students will have until November 25th to complete your course work. Check for assignment dates in Canvas.
04:30pm - 07:30pm
Online
24 Seats remaining
AutoCAD Fundamentals
This course meets online via Zoom every Monday and Wednesday, starting on 10/22/25 and ending 12/17/25. Access to Canvas starts 10/15/25. No class 11/26/25 in observance of Thanksgiving.
05:30pm - 08:30pm
Online
9 Seats remaining
Basic Computer Skills I: Using the Computer and Internet
This class meets every Monday from 5:30 PM to 8:30 PM and every Wednesday from 5:30 PM to 7:30 PM. The class runs from October 6, 2025 to November 12, 2025. The classroom is located at the West Valley Center (WVLC) campus, Room 122 (WVLC-122).
05:30pm - 08:30pm
West Valley Center - WVLC, 122
13 Seats remaining
Elementary Methods of Teaching Social Studies
Course is Hybrid (Online + Webinar). The webinar meetings are every Wednesday from 10/22/2025 to 12/03/2025, from 5:30pm to 8:30pm. You will have until December 9th to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
24 Seats remaining
Energy Efficient Lighting
This course is a 16-week synchronous hybrid Canvas course that utilizes in-person in-class sessions, live Zoom webinars, and approximately 12 hours of additional online content in Canvas.**Canvas access is available Tuesday 8/26/2025 through Wednesday 12/10/2025. **Live Zoom Webinars will begin Wednesday 08/27/2025 from 5:30 to 8:30 pm. Participants will access Zoom through Canvas, and will have access to a recording of each session the following week. **Group lighting audit projects and presentations will be conducted in-person in MFEC206.
05:30pm - 08:30pm
Miller Campus - MFEC, 206
24 Seats remaining
Intermediate Excel
Class will meet in-person on Monday and Wednesday evenings from 5:30 pm to 8:30 pm on Miller Campus in the Miller Professional Development Center, room 114 (MPDC 114). The course starts 9/29/25. On 10/20/25 there will be an optional review for the exam. The optional Microsoft Excel Assoicate Exam will be proctored on 10/22/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 114
14 Seats remaining
SolidWorks Essentials
Class meets online via Zoom starting 10/20/25 and ending 12/15/25. Access to Canvas begins 10/13/25. No class 11/26 in observance of Thanksgiving.
05:30pm - 08:30pm
Online
7 Seats remaining
UI/UX Design Principles
This course meets Online via Zoom and in CT-018D from 5:30pm - 8:30pm every Monday and Wednesday starting 9/8/25 and ending 10/29/25.
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018D
9 Seats remaining
Basic Electricity for the Power Industry
This is a Hybrid Course with online and in-person lab work runs from 10/08/2025 to 12/11/2025. Lab work will be 6-9pm on Monday, Wednesday, and Thursday at SLCC Miller Campus MCPC-120A. Please watch for communication in Canvas, from the program manager, and from the instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
19 Seats remaining
Introduction to Medical Device Industry
Class will run from 09/17/25 through 10/22/25 for 6 weeks in person on Wednesday evenings from 6:00 pm to 9:00 pm at the Miller Campus, classroom TBD.
06:00pm - 09:00pm
Miller Campus - MCPC, 110
3 Seats remaining
Lineworker Apprenticeship 3A
This is a Hybrid Course with online and in-person lab work.Canvas access is available August 26, 2025, through December 7, 2025.Lab work will be 6pm to 9pm on Wednesdays beginning August 27, 2025, through December 3st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard.Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
11 Seats remaining
Lineworker Apprenticeship 3B
This is a Hybrid Course with online and in-person lab work. Lab work will be 6pm to 9pm on Wednesdays beginning on August 27, 2025 and running through December 3rd at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
15 Seats remaining
Lineworker Apprenticeship 4A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Wednesdays beginning August 27, 2025, through December 3st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
7 Seats remaining
Lineworker Apprenticeship 4B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Wednesdays beginning August 27, 2025, through December 3st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard.Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
15 Seats remaining
|
23
Basic Computer Skills II: Introduction to Word
This class meets every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The class runs from October 21, 2025 to November 13, 2025. The classroom is located at the Taylorsville Redwood Rd. campus, Construction Trades (CT) building, Room 018E (RRW-CT-018E).
09:00am - 12:00pm
Taylorsville Redwood Campus - CT, 018E
12 Seats remaining
WordPress & CMS Fundamentals
This course meets online via Zoom every Tuesday and Thursday from 12:00pm to 3:00pm starting 9/30/25 and ending 10/23/25.
12:00pm - 03:00pm
Online
10 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
9 Seats remaining
AutoCAD Civil 3D
Class meets in-person every Tuesday and Thursday starting 10/14/25 and ending 11/20/25. Access to Canvas begins 10/7/25.
05:30pm - 08:30pm
Miller Campus - MCPC, 108
10 Seats remaining
Autodesk Revit Comprehensive
This course meets in-person Tuesdays and Thursdays, starting 10/21/25 and ending 12/16/25. Access to Canvas begins 10/14/25. No class 11/27/25 in observance of Thanksgiving.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
14 Seats remaining
HTML & CSS
This course meets Tuesday and Thursdays from 5:30pm - 8:30pm starting 10/7/25 and ending 11/25/25.
05:30pm - 08:30pm
Online
10 Seats remaining
QuickBooks Essentials
This course meets in-person on Thursday evenings beginning on 10/2/25. On Thusday, 11/13/25 there will be an optional review session from 5:30pm - 8:30pm. The optional QuickBooks Certified User Exam will be proctored in-person on Tuesday, 11/20/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 118
16 Seats remaining
Basic Electricity for the Power Industry
This is a Hybrid Course with online and in-person lab work runs from 10/08/2025 to 12/11/2025. Lab work will be 6-9pm on Monday, Wednesday, and Thursday at SLCC Miller Campus MCPC-120A. Please watch for communication in Canvas, from the program manager, and from the instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
19 Seats remaining
Basic Manufacturing Skills
Class will run from 10/9/25 through 11/20/25 in person on Thursday evenings from 6:00 pm to 9:00 pm for 7 weeks at the Miller Campus, classroom TBD.
06:00pm - 09:00pm
Miller Campus - MPDC, 114
8 Seats remaining
|
24
Lineworker 4
This is the 4th and final Lineworker lab course. This is a Hybrid Course with online and in-person lab work. Canvas access is available September 5, 2025, through October 31, 2025. Lab work will be 7am to 5:30pm on Fridays beginning September 12, 2025, through October 31, 2025, at either SLCC Miller Pole Yard, MCPC-123, or pre-determined industry partner locations. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
07:00am - 05:30pm
Miller Campus - MCPC, 123
25 Seats remaining
Substation Apprenticeship 4B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 7am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
07:00am - 05:30pm
Miller Campus - MCPC, 122
23 Seats remaining
Meter Apprenticeship 1A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
24 Seats remaining
Meter Apprenticeship 1B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
25 Seats remaining
Meter Apprenticeship 2A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
22 Seats remaining
Meter Apprenticeship 3A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 8am to 5:30pm on Fridays beginning August 29, 2025 through December 5th, 2025, at either SLCC Miller Pole Yard, MCPC-120-A or an industry training partner. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
23 Seats remaining
Meter Apprenticeship 3B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
23 Seats remaining
Meter Apprenticeship 4A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-120A or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
25 Seats remaining
Substation Apprenticeship 1A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 123
24 Seats remaining
Substation Apprenticeship 1B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 123
23 Seats remaining
Substation Apprenticeship 2A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 123
18 Seats remaining
Substation Apprenticeship 2B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 123
26 Seats remaining
Substation Apprenticeship 3A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 123
24 Seats remaining
Substation Apprenticeship 3B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 123
20 Seats remaining
Substation Apprenticeship 4A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Labs will be held twice a month on Fridays beginning August 29, 2025 through December 5, 2025, from 8am to 5:30pm, at either MCPC-123 or pre-determined industry partner. The instructor will provide detailed schedule as part of class.
08:00am - 05:30pm
Miller Campus - MCPC, 123
24 Seats remaining
|
25
UHP Heavy-Duty Safety Inspection
Class is scheduled for October 18 & 25 from 8:00 to 5:00 PM on the Westpointe Campus, 1060 N Flyer Way, Salt Lake City, UT 84116. Class will be held in the Westpointe Workforce Training & Education Center (WWTE) building, Room 159. The entrance is on the north side of the building.
08:00am - 05:00pm
Westpointe Center - WWTE, 159
21 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 10am - Noon on 10/25/2025.
10:00am - 12:00pm
Miller Campus - MFEC, 107
4 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 1-3pm on 10/25/2025.
01:00pm - 03:00pm
Miller Campus - MFEC, 107
4 Seats remaining
|
|
26
|
27
HTML & CSS
This course meets Monday and Wednesday, Online via Zoom, from 9:00am - 12:00pm starting 9/10/25 and ending 10/29/25
09:00am - 12:00pm
Online
10 Seats remaining
Advanced Excel
Class is held every Monday and Wednesday in the Miller Professional Development Center (MPDC) Building 1 Room 118 (MPDC118) starting 10/27/25. On 11/17 there will be an optional review night for the exam. The Microsoft Excel Expert Exam will be proctored on 11/19 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 118
18 Seats remaining
AutoCAD Fundamentals
This course meets online via Zoom every Monday and Wednesday, starting on 10/22/25 and ending 12/17/25. Access to Canvas starts 10/15/25. No class 11/26/25 in observance of Thanksgiving.
05:30pm - 08:30pm
Online
9 Seats remaining
Basic Computer Skills I: Using the Computer and Internet
This class meets every Monday from 5:30 PM to 8:30 PM and every Wednesday from 5:30 PM to 7:30 PM. The class runs from October 6, 2025 to November 12, 2025. The classroom is located at the West Valley Center (WVLC) campus, Room 122 (WVLC-122).
05:30pm - 08:30pm
West Valley Center - WVLC, 122
13 Seats remaining
SolidWorks Essentials
Class meets online via Zoom starting 10/20/25 and ending 12/15/25. Access to Canvas begins 10/13/25. No class 11/26 in observance of Thanksgiving.
05:30pm - 08:30pm
Online
7 Seats remaining
UI/UX Design Principles
This course meets Online via Zoom and in CT-018D from 5:30pm - 8:30pm every Monday and Wednesday starting 9/8/25 and ending 10/29/25.
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018D
9 Seats remaining
Basic Electricity for the Power Industry
This is a Hybrid Course with online and in-person lab work runs from 10/08/2025 to 12/11/2025. Lab work will be 6-9pm on Monday, Wednesday, and Thursday at SLCC Miller Campus MCPC-120A. Please watch for communication in Canvas, from the program manager, and from the instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
19 Seats remaining
Lineworker Apprenticeship 1A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Mondays beginning September 8, 2025, through December 1st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
12 Seats remaining
Lineworker Apprenticeship 1B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Mondays beginning September 8, 2025, through December 1st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
10 Seats remaining
Lineworker Apprenticeship 2A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Mondays beginning September 8, 2025, through December 1st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
15 Seats remaining
Lineworker Apprenticeship 2B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Mondays beginning September 8, 2025, through December 1st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
14 Seats remaining
|
28
Introduction to Quality Systems
Class will run from 10/28/25 through 12/16/25 100% online for 7 weeks. Your instructor will give you instructions through Canvas regarding participation expectations, course logistics, and classroom management.
12:00am - 12:00am
Online
8 Seats remaining
U.S. Genealogy Research I
Course Dates: 10/14/25 through 12/12/25; The course is self-paced, 100% online, and available 24/7 with no specific days or meeting times. Login at this link ONLY: https://slcc.instructure.com/login/canvas?Refer to Canvas and your instructor's specified assignment due dates. ?Ignore the instructions at the bottom of the confirmation email to set up a SLCC.edu Canvas account.
12:00am - 12:00am
Online
9 Seats remaining
Basic Computer Skills II: Introduction to Word
This class meets every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The class runs from October 21, 2025 to November 13, 2025. The classroom is located at the Taylorsville Redwood Rd. campus, Construction Trades (CT) building, Room 018E (RRW-CT-018E).
09:00am - 12:00pm
Taylorsville Redwood Campus - CT, 018E
12 Seats remaining
Elementary Methods of Teaching PE
Course is fully Online from 10/28/2025 to 12/15/2025. No meetings scheduled. Check for assignments' dates in Canvas.
12:00pm - 11:59pm
Online
24 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
9 Seats remaining
Applied Emissions - Practicum
Course is available only to students who have successfully completed the online course called WTAE 100. Course meets in-person from 2-4pm on 10/28/2025.
02:00pm - 04:00pm
Miller Campus - MFEC, 107
3 Seats remaining
Elementary Methods of Teaching Science
Course is Hybrid (Online + Webinar). The webinar meetings are every Tuesday from 10/14/2025 to 11/25/2025, from 4:30pm to 7:30pm. You will have until December 1st to complete your course work. Check for assignments' dates in Canvas.
04:30pm - 07:30pm
Online
22 Seats remaining
Classroom Climate that Promotes Student Learning
Course is Hybrid (Online + Webinar). The webinar meetings are from 10/28/2025 to 11/25/2025, from 5pm to 8pm. You will have until December 1st to complete your course work. Check for assignments' dates in Canvas.
05:00pm - 08:00pm
Online
20 Seats remaining
AutoCAD Civil 3D
Class meets in-person every Tuesday and Thursday starting 10/14/25 and ending 11/20/25. Access to Canvas begins 10/7/25.
05:30pm - 08:30pm
Miller Campus - MCPC, 108
10 Seats remaining
Autodesk Revit Comprehensive
This course meets in-person Tuesdays and Thursdays, starting 10/21/25 and ending 12/16/25. Access to Canvas begins 10/14/25. No class 11/27/25 in observance of Thanksgiving.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
14 Seats remaining
Elementary Methods of Teaching Literacy #2
Course is Hybrid (Online + Webinar). The webinar meetings are every Tuesday from 10/21/2025 to 12/02/2025, from 5:30pm to 8:30pm. You will have until December 8th to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
24 Seats remaining
Empowering Learners
Course is hybrid format (Online + Webinar). Webinar meetings are scheduled every Tuesday from October 28th to November 25th, 2025 from 5:30pm to 8:30pm . You will have until December 1st to complete your course work. Check for assignment dates in Canvas.
05:30pm - 08:30pm
Online
25 Seats remaining
HTML & CSS
This course meets Tuesday and Thursdays from 5:30pm - 8:30pm starting 10/7/25 and ending 11/25/25.
05:30pm - 08:30pm
Online
10 Seats remaining
Building Automation Systems Fundamentals
WTBA 140 is the first of 4 courses that comprise SLCC's Level 1 BAS certificate. It meets Tuesdays nights from 6-7pm in MCPC 123 on the Miller Campus in Sandy from 8/26/25 to 12/02/25. The other courses are: WTBA 150 Basic Electrical Concepts, and WTBA 160 Devices & Control Theory. These 3 classes are taken concurrently in the first 15 weeks of Spring 2025 semester. The other class is WTBA 170, BAS Fire & Alarm.
06:00pm - 07:00pm
Miller Campus - MCPC, 123
2 Seats remaining
Building Automation Systems Devices and Control Theory
System Description : WTBA 160 is the third of 4 courses that comprise SLCC's Level 1 BAS certificate. It meets Tuesdays nights from 7-9:30pm in MCPC 123 on the Miller Campus in Sandy from 8/26/25 to 12/2/25. The other courses are: WTBA 150 Basic Electrical Concepts, and WTBA 160 Devices & Control Theory. These 3 classes are taken concurrently in the first 15 weeks of Fa;; 2025 semester. The other class is WTBA 170, Fire & Alarm, which runs for 15 weeks starting Spring 2026.
07:00pm - 09:30pm
Miller Campus - MCPC, 123
3 Seats remaining
|
29
Introduction to Quality Control ONLINE
Class will run from 10/1/25 through 11/12/25 100% online for 7 weeks. The online classroom is open 24/7 once the course begins. Your instructor will give you instructions through Canvas regarding participation expectations, course logistics, and classroom management.
12:00am - 12:00am
Online
11 Seats remaining
Certified Registered Pool Operator
Webinar 2-Day: Course Dates: 10/29/25 to 10/30/25; Click on "Full Schedule". This course is taught on Wednesday and Thursday from 9:00 am to 4:00 pm, two full days via LIVE webinar. We will send you a direct link to the webinar via email. You DO NOT need to login to Canvas or access www.slcc.edu for any reason.
09:00am - 04:00pm
Online
10 Seats remaining
Certified Registered Pool Operator
Live 2-Day: Course Dates: 10/29/25 thru 10/30/25; This course is taught on Wednesday and Thursday, two full days from 9:00 am to 4:00 pm each day. Click on "Full Schedule". You DO NOT need to login to Canvas account or access www.slcc.edu for any reason. Contact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
09:00am - 04:00pm
Miller Campus - MFEC, 206
24 Seats remaining
HTML & CSS
This course meets Monday and Wednesday, Online via Zoom, from 9:00am - 12:00pm starting 9/10/25 and ending 10/29/25
09:00am - 12:00pm
Online
10 Seats remaining
Instructional Practices that Promote Student Learning
Course is hybrid format (Online + Webinar). Meeting are scheduled every Wednesday from October 22th to November 19th, 2025 from 4:30pm to 7:30pm. Students will have until November 25th to complete your course work. Check for assignment dates in Canvas.
04:30pm - 07:30pm
Online
24 Seats remaining
Methods of Teaching Secondary Special Education Mathematics
Course is hybrid format (Online + Webinar). Webinar meetings are scheduled every Wednesday from October 29th to December 3rd, 2025 from 4:30pm to 7:30 pm. You will have until December 9th to complete your course work. Check for assignment dates in Canvas.
04:30pm - 07:30pm
Online
29 Seats remaining
Advanced Excel
Class is held every Monday and Wednesday in the Miller Professional Development Center (MPDC) Building 1 Room 118 (MPDC118) starting 10/27/25. On 11/17 there will be an optional review night for the exam. The Microsoft Excel Expert Exam will be proctored on 11/19 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 118
18 Seats remaining
AutoCAD Fundamentals
This course meets online via Zoom every Monday and Wednesday, starting on 10/22/25 and ending 12/17/25. Access to Canvas starts 10/15/25. No class 11/26/25 in observance of Thanksgiving.
05:30pm - 08:30pm
Online
9 Seats remaining
Basic Computer Skills I: Using the Computer and Internet
This class meets every Monday from 5:30 PM to 8:30 PM and every Wednesday from 5:30 PM to 7:30 PM. The class runs from October 6, 2025 to November 12, 2025. The classroom is located at the West Valley Center (WVLC) campus, Room 122 (WVLC-122).
05:30pm - 08:30pm
West Valley Center - WVLC, 122
13 Seats remaining
Elementary Methods of Teaching Social Studies
Course is Hybrid (Online + Webinar). The webinar meetings are every Wednesday from 10/22/2025 to 12/03/2025, from 5:30pm to 8:30pm. You will have until December 9th to complete your course work. Check for assignments' dates in Canvas.
05:30pm - 08:30pm
Online
24 Seats remaining
Energy Efficient Lighting
This course is a 16-week synchronous hybrid Canvas course that utilizes in-person in-class sessions, live Zoom webinars, and approximately 12 hours of additional online content in Canvas.**Canvas access is available Tuesday 8/26/2025 through Wednesday 12/10/2025. **Live Zoom Webinars will begin Wednesday 08/27/2025 from 5:30 to 8:30 pm. Participants will access Zoom through Canvas, and will have access to a recording of each session the following week. **Group lighting audit projects and presentations will be conducted in-person in MFEC206.
05:30pm - 08:30pm
Miller Campus - MFEC, 206
24 Seats remaining
SolidWorks Essentials
Class meets online via Zoom starting 10/20/25 and ending 12/15/25. Access to Canvas begins 10/13/25. No class 11/26 in observance of Thanksgiving.
05:30pm - 08:30pm
Online
7 Seats remaining
UI/UX Design Principles
This course meets Online via Zoom and in CT-018D from 5:30pm - 8:30pm every Monday and Wednesday starting 9/8/25 and ending 10/29/25.
05:30pm - 08:30pm
Taylorsville Redwood Campus - CT, 018D
9 Seats remaining
Basic Electricity for the Power Industry
This is a Hybrid Course with online and in-person lab work runs from 10/08/2025 to 12/11/2025. Lab work will be 6-9pm on Monday, Wednesday, and Thursday at SLCC Miller Campus MCPC-120A. Please watch for communication in Canvas, from the program manager, and from the instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
19 Seats remaining
Introduction to FDA Regulations
Class will run from 10/29/25 through 12/17/25 (skip 11/26) in person on Wednesday evenings from 6:00 pm to 9:00 pm for 7 weeks at the Miller Campus, classroom TBD.
06:00pm - 09:00pm
Miller Campus - MPDC, 114
7 Seats remaining
Lineworker Apprenticeship 3A
This is a Hybrid Course with online and in-person lab work.Canvas access is available August 26, 2025, through December 7, 2025.Lab work will be 6pm to 9pm on Wednesdays beginning August 27, 2025, through December 3st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard.Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
11 Seats remaining
Lineworker Apprenticeship 3B
This is a Hybrid Course with online and in-person lab work. Lab work will be 6pm to 9pm on Wednesdays beginning on August 27, 2025 and running through December 3rd at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
15 Seats remaining
Lineworker Apprenticeship 4A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Wednesdays beginning August 27, 2025, through December 3st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
7 Seats remaining
Lineworker Apprenticeship 4B
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 6pm to 9pm on Wednesdays beginning August 27, 2025, through December 3st, 2025, at either SLCC Miller Pole Yard, MCPC-123, or the St. George Power Training Yard.Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 123
15 Seats remaining
|
30
Basic Computer Skills II: Introduction to Word
This class meets every Tuesday from 9:00am to 12:00pm and every Thursday from 9:00am to 11:00am. The class runs from October 21, 2025 to November 13, 2025. The classroom is located at the Taylorsville Redwood Rd. campus, Construction Trades (CT) building, Room 018E (RRW-CT-018E).
09:00am - 12:00pm
Taylorsville Redwood Campus - CT, 018E
12 Seats remaining
Certified Registered Pool Operator
Webinar 2-Day: Course Dates: 10/29/25 to 10/30/25; Click on "Full Schedule". This course is taught on Wednesday and Thursday from 9:00 am to 4:00 pm, two full days via LIVE webinar. We will send you a direct link to the webinar via email. You DO NOT need to login to Canvas or access www.slcc.edu for any reason.
09:00am - 04:00pm
Online
10 Seats remaining
Certified Registered Pool Operator
Live 2-Day: Course Dates: 10/29/25 thru 10/30/25; This course is taught on Wednesday and Thursday, two full days from 9:00 am to 4:00 pm each day. Click on "Full Schedule". You DO NOT need to login to Canvas account or access www.slcc.edu for any reason. Contact Mykel Severson at Mykel.severson@slcc.edu or 801-957-5407 if you have questions.
09:00am - 04:00pm
Miller Campus - MFEC, 206
24 Seats remaining
Basic Computer Skills III: Introduction to Excel
This course meets every Tuesday from 1:00pm-4:00pm and Thursday from 1:00pm-3:30pm at the Construction Trades Building, room 018E at the Redwood campus. September 2, 2025 to November 6, 2025.
01:00pm - 04:00pm
Taylorsville Redwood Campus - CT, 018E
9 Seats remaining
AutoCAD Civil 3D
Class meets in-person every Tuesday and Thursday starting 10/14/25 and ending 11/20/25. Access to Canvas begins 10/7/25.
05:30pm - 08:30pm
Miller Campus - MCPC, 108
10 Seats remaining
Autodesk Revit Comprehensive
This course meets in-person Tuesdays and Thursdays, starting 10/21/25 and ending 12/16/25. Access to Canvas begins 10/14/25. No class 11/27/25 in observance of Thanksgiving.
05:30pm - 08:30pm
Miller Campus - MFEC, 208
14 Seats remaining
HTML & CSS
This course meets Tuesday and Thursdays from 5:30pm - 8:30pm starting 10/7/25 and ending 11/25/25.
05:30pm - 08:30pm
Online
10 Seats remaining
QuickBooks Essentials
This course meets in-person on Thursday evenings beginning on 10/2/25. On Thusday, 11/13/25 there will be an optional review session from 5:30pm - 8:30pm. The optional QuickBooks Certified User Exam will be proctored in-person on Tuesday, 11/20/25 starting promptly at 5:30pm.
05:30pm - 08:30pm
Miller Campus - MPDC, 118
16 Seats remaining
Basic Electricity for the Power Industry
This is a Hybrid Course with online and in-person lab work runs from 10/08/2025 to 12/11/2025. Lab work will be 6-9pm on Monday, Wednesday, and Thursday at SLCC Miller Campus MCPC-120A. Please watch for communication in Canvas, from the program manager, and from the instructors for weekly specifics.
06:00pm - 09:00pm
Miller Campus - MCPC, 120A
19 Seats remaining
Basic Manufacturing Skills
Class will run from 10/9/25 through 11/20/25 in person on Thursday evenings from 6:00 pm to 9:00 pm for 7 weeks at the Miller Campus, classroom TBD.
06:00pm - 09:00pm
Miller Campus - MPDC, 114
8 Seats remaining
|
31
Lineworker 4
This is the 4th and final Lineworker lab course. This is a Hybrid Course with online and in-person lab work. Canvas access is available September 5, 2025, through October 31, 2025. Lab work will be 7am to 5:30pm on Fridays beginning September 12, 2025, through October 31, 2025, at either SLCC Miller Pole Yard, MCPC-123, or pre-determined industry partner locations. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
07:00am - 05:30pm
Miller Campus - MCPC, 123
25 Seats remaining
Applied Emissions
Course is self-paced and 100% online. You can access content as soon as you are registered. The required 24 hours of training must be completed by October 31, 2025.
08:00am - 08:01am
Online
499 Seats remaining
Meter Apprenticeship 3A
This is a Hybrid Course with online and in-person lab work. Canvas access is available August 26, 2025, through December 7, 2025. Lab work will be 8am to 5:30pm on Fridays beginning August 29, 2025 through December 5th, 2025, at either SLCC Miller Pole Yard, MCPC-120-A or an industry training partner. Please watch for communication in Canvas, from your employer, and from instructors for weekly specifics.
08:00am - 05:30pm
Miller Campus - MCPC, 120A
23 Seats remaining
|
|
| << Previous Month | Today | Next Month >> | ||||