Discover the effects of voltage, amperage, and resistance on electrical controls, motors, and wiring diagrams. In the lab, you'll practice how to wire components of heating and air conditioning systems. Book required.

---

August 31, 2026 to October 26, 2026, 06:00pm - 10:00pm, HVAC Technology Shop (H105)

Discover fundamental principles and applications of refrigeration. You'll receive hands-on experience through lab activities, shop demonstrations, and mechanical mock-up simulations. Book required.

---

July 6, 2026 to August 26, 2026, 06:00pm - 10:00pm, HVAC Technology Shop (H105)

Determine the correct capacity of heating and cooling equipment using the ACCA Manual J method. Identify calculations required for residential air distribution and duct sizing using ACCA Manual D. Class also covers an introduction to psychometrics and indoor air quality. Book required.

---

May 19, 2026 to June 30, 2026, 06:00pm - 10:00pm, Vision Care Technology Classroom (2405)
October 28, 2026 to December 16, 2026, 06:00pm - 10:00pm, Vision Care Technology Classroom (2405)

Take your home repair knowledge to the next level. This hands-on class includes roofing and framing fundamentals, as well as rough-in framing for doors and windows.

---

July 1, 2026 to September 2, 2026, 06:00pm - 09:00pm, Carpentry Shop (H104)
September 30, 2026 to December 16, 2026, 06:00pm - 09:00pm, Carpentry Shop (H104)

Bought an old house that could use a facelift? Discover how to measure, cut, and install door/window trim, crown molding, and baseboard trim the right way.

---

Monday, June 22, 2026, 06:00pm - 10:00pm, Carpentry Shop (H104)
Monday, November 2, 2026, 06:00pm - 10:00pm, Carpentry Shop (H104)

Ceramic tile improves the look and feel of any bathroom. Learn how to measure and lay out your tub or shower space correctly. Skills emphasized include estimating, cutting, spacing, and grouting techniques. Bring safety glasses.

---

August 17-18, 2026, 06:00pm - 10:00pm, Carpentry Shop (H104)
December 7-8, 2026, 06:00pm - 10:00pm, Carpentry Shop (H104)

Build a floating shelf while learning about tools, safety, supplies, and fundamental skills such as making cuts and fastening boards.

---

Monday, October 26, 2026, 06:00pm - 10:00pm, Carpentry Shop (H104)

Build a planter box to take home while learning about tools, safety, supplies, and fundamental woodworking skills.

---

Monday, August 31, 2026, 06:00pm - 10:00pm, Carpentry Shop (H104)

Gain hands-on skills in selecting, handling, and using diverse tools and materials used in the industry. The comprehensive lessons and practical experiences will help build a strong foundation for a successful carpentry career.

---

This course contains no available sessions.
Click here to be notified about the next available session.

Acquire vital numerical skills necessary for carpentry by discovering how to handle whole numbers, decimals, fractions, and percentages flawlessly. These precise measurement skills will elevate your carpentry knowledge and enhance job efficiency.

---

This course contains no available sessions.
Click here to be notified about the next available session.

Discover important facets of the drain-waste-vent system, including design, installation, connecting, testing, and more. Installing roof, floor, and area drains will also be covered. You will also learn the functions of the water distribution system and identify proper techniques for locating, installing, and testing complete water service and distribution systems. Other topics of discussion include sewage and sump pumps, corrosive resistant waste, and compressed air.

---

July 7, 2026 to August 11, 2026, 06:00pm - 10:00pm, Plumbing Room (128)

Discover important facets of the drain-waste-vent system, including design, installation, connecting, testing, and more. Installing roof, floor, and area drains will also be covered. You will also learn the functions of the water distribution system and identify proper techniques for locating, installing, and testing complete water service and distribution systems. Other topics of discussion include sewage and sump pumps, corrosive resistant waste, and compressed air. Book required.

---

August 13, 2026 to September 15, 2026, 06:00pm - 10:00pm, Plumbing Room (128)

Don't be intimidated by minor electrical repairs for your home. With step-by-step instructions on troubleshooting and repair of fixtures, outlets, ceiling fans, and more, you will feel confident in no time! Bring safety glasses.

---

Monday, August 24, 2026, 06:00pm - 10:00pm, Carpentry Shop (H104)
Monday, December 14, 2026, 06:00pm - 10:00pm, Carpentry Shop (H104)

Cover new Electric Code Updates as put forth by the OK CIB. NFPA 70 NEC 2023 Code Book suggested. Photo ID required.

---

Saturday, September 12, 2026, 08:00am - 03:00pm, Sports Medicine Classroom (2424)
Saturday, November 7, 2026, 08:00am - 03:00pm, Sports Medicine Classroom (2424)

Build on your basic electrical knowledge by exploring several electrical lighting installation methods, with an emphasis on performing these tasks according to Code rules. Projects will include single-pole lighting, 3-way lighting, 4-way lighting, and wiring receptacles and outlets. Book required.

---

August 31, 2026 to October 21, 2026, 06:00pm - 09:00pm, Electrical Technology Shop (H101)

Take your electrical installation skills to the next level by practicing wiring and installing a variety of common electrical projects - including ceiling fans, exhaust fans, smoke and motion detectors, dimmers, doorbells, appliance branch circuits, underground installations, NEMA ratings, and types of receptacles. Book required.

---

October 26, 2026 to December 16, 2026, 06:00pm - 09:00pm, Electrical Technology Shop (H101)

Successfully complete the EPA Section 608 Certification of the Federal Clean Air Act for handling regulated refrigerants exam. Content includes Core, Type I, Type II, Type III, and Universal. Upon enrollment, you will receive a preparatory manual, study guide, and access to free online practice exams. Instruction is in English; however, exams are available in Spanish. Class format includes lecture and open discussion with NO hands-on recovery training.
It is strongly advised that registration occurs prior to the class start date to allow time to study materials. Enroll in-person or online and pick up your study materials at the Client Service Center, 3638 S. Memorial Drive.

---

August 12-19, 2026, 06:00pm - 10:00pm, Training Room 29 (2427)
September 23-30, 2026, 06:00pm - 10:00pm, Training Room 29 (2427)

Explore the art of roofing, discover precise window and door installation, improve siding and deck skills, and create captivating facades and outdoor spaces. Seamlessly integrate these elements into your carpentry projects with stunning craftsmanship. Book required.

---

This course contains no available sessions.
Click here to be notified about the next available session.

Plumbing problems got you down? Don't be driven crazy by that dripping leaky faucet. Fix leaks, clogged toilets, clogged drains, and snake a drain like a pro. Bring safety glasses.

---

Monday, June 29, 2026, 06:00pm - 10:00pm, Carpentry Shop (H104)
Monday, November 9, 2026, 06:00pm - 10:00pm, Carpentry Shop (H104)

Discover the appropriate selection, use, and application of fixtures, fittings, and valves used in a variety of plumbing applications. You will also learn the correct use of plumbing tools and practice how to properly measure, cut, join, and install pipe and tubing.

---

April 30, 2026 to June 18, 2026, 06:00pm - 10:00pm, Plumbing Room (128)

Build the skills you need to operate a forklift safely and confidently, from pre-shift inspections to appropriate emergency response. You will focus on OSHA-compliant load handling, precision maneuvering, and the stable stacking techniques required in real world environments.

---

Saturday, September 12, 2026, 08:00am - 12:00pm, Safety Lab
Saturday, November 7, 2026, 08:00am - 12:00pm, Safety Lab

Topics covered include design, installation, and maintenance of heat pumps. In the lab, you'll receive hands-on experience troubleshooting wiring problems. Book required.

---

June 3-30, 2026, 06:00pm - 10:00pm, HVAC Technology Shop (H105)
October 6, 2026 to December 15, 2026, 06:00pm - 10:00pm, HVAC/Refrigeration Technologies Shop (H107)

Explore essential procedures for boiler start-up and shut-down, maintenance, and gain an overview of key components, accessories, and tools.

---

September 30, 2026 to December 9, 2026, 06:00pm - 10:00pm, HVAC/Refrigeration Technologies Shop (H107)

Tired of looking at the small dents, cracks, or holes in your walls? This hands-on class will prepare you to fix damage to your drywall with instruction on industry-proven techniques and proper materials needed to achieve expert results! Bring safety glasses.

---

Monday, November 16, 2026, 06:00pm - 10:00pm, Carpentry Shop (H104)

Designed to provide hands-on training in most phases of home repair and maintenance. You will learn the proper use of hand and power tools, carpentry basics, drywall, electrical, and concrete.

---

May 20, 2026 to June 17, 2026, 06:00pm - 09:00pm, Carpentry Shop (H104)
July 6, 2026 to August 10, 2026, 06:00pm - 09:00pm, Carpentry Shop (H104)
September 14, 2026 to October 12, 2026, 06:00pm - 09:00pm, Carpentry Shop (H104)
October 20, 2026 to November 17, 2026, 06:00pm - 09:00pm, Carpentry Shop (H104)

Learn how the codes are written, adopted, modified, and implemented. In addition, prepare for the Oklahoma Plumbing Journeyman and Gas exam by learning the standards, regulations, and applications of the current code versions. You will also review Math for Plumbers and Pipefitters and the Code of Federal Regulations.

---

This course contains no available sessions.
Click here to be notified about the next available session.

Want to replace your old flooring with a beautiful new wood floor? Learn how in this hands-on class. Bring safety glasses.

---

Monday, November 30, 2026, 06:00pm - 10:00pm, Carpentry Shop (H104)

Make your mark as a skilled interior finishing carpenter by discovering how to infuse personality into interior finishings, incorporate insulation and ventilation into your design, and add character through molding and trim. Book required.

---

This course contains no available sessions.
Click here to be notified about the next available session.

Ready to get started in the electrical trade? Begin with the basics of safety, tools, and equipment, then move on to measurements, interpreting schematics, basic wiring circuits, terminations, switches, and receptacles.

---

July 8, 2026 to August 26, 2026, 06:00pm - 09:00pm, Electrical Technology Shop (H101)

Enhance your electrical skills by stepping into the world of wiring for low voltage systems. Includes jobs such as security and fire alarm systems and communication cabling for data, voice, video, coax, and cat 5.

---

This course contains no available sessions.
Click here to be notified about the next available session.

This hands-on class covers different types of low-pressure boilers and chillers using both hot water and steam. Review boiler components, accessories, and specialty tools, both centrifugal and absorption chillers.

---

July 8, 2026 to September 9, 2026, 06:00pm - 09:00pm, HVAC/Refrigeration Technologies Shop (H107)

Build with your own two hands. Get demonstrations and hands-on practice mixing and spreading mortar, laying bricks, rocks, and cinder blocks to a line and with a level.

---

October 29, 2026 to November 19, 2026, 06:00pm - 09:00pm, Carpentry Shop (H104)

This class has been approved by the Construction Industries Board Mechanical Examining Committee for 6-hours of CE credit. Photo ID required.

---

Saturday, September 12, 2026, 08:30am - 03:30pm, Surgical Technology Classroom (2307)
Saturday, November 7, 2026, 08:30am - 03:30pm, Surgical Technology Classroom (2307)

Designed to help workers stay up-to-date with safety requirements in the construction industry. Recognition, avoidance, and prevention of safety and health hazards are emphasized. Discussion includes information regarding workers' rights and employer responsibilities. OSHA® 10 card issued upon completion.

---

September 22-29, 2026, 05:30pm - 10:00pm, Masonry Technology Shop (H102)
November 2-9, 2026, 05:30pm - 10:00pm, Masonry Technology Shop (H102)

Specifically designed safety instruction for general workers, warehousing, manufacturing employees, and job supervisors involved in general industry activities. OSHA® 10 card issued upon completion.

---

September 22-29, 2026, 05:30pm - 10:00pm, Masonry Technology Shop (H102)
November 2-9, 2026, 05:30pm - 10:00pm, Masonry Technology Shop (H102)

Designed to provide foundational skills and knowledge for a career in the plumbing profession, this class will prepare you with essential training in important safety measures and math concepts you will use in all phases of the plumbing trade.

---

This course contains no available sessions.
Click here to be notified about the next available session.

Investigate the applications of the National Electrical Code to residential wiring. Areas covered include wiring methods, receptacle placement, lighting, box-sizing, branch circuit calculations, equipment grounding, AFCI and GFCI requirements, and wire ampacity calculations.

---

This course contains no available sessions.
Click here to be notified about the next available session.

Proper installation, service, and repair of residential air conditioning units is the emphasis of this class. Book required.

---

July 7, 2026 to August 13, 2026, 06:00pm - 10:00pm, HVAC Technology Shop (H105)

Learn how to install, service, and repair all types of home heating systems, including natural gas, propane, or electrical resistance. Book required.

---

May 18, 2026 to June 22, 2026, 06:00pm - 10:00pm, HVAC Technology Shop (H105)
August 25, 2026 to September 24, 2026, 06:00pm - 10:00pm, HVAC Technology Shop (H105)

This class introduces students to the various types of service entrance equipment used in residential electrical wiring. It also covers the National Electrical Code requirements for service-entrance load calculations, grounding, and bonding. Book required.

---

May 18, 2026 to June 29, 2026, 06:00pm - 09:00pm, Electrical Technology Shop (H101)

Basic roofing repair skills come in handy, especially after strong Oklahoma winds come sweeping across your home. Identify different roof structures, practice replacing damaged shingles and flashing, and gain knowledge of sealing techniques.

---

Monday, October 19, 2026, 06:00pm - 10:00pm, Carpentry Shop (H104)

Turn your blueprints into reality and gain a deeper understanding of how to create framework with structural integrity while blending functionality and craftsmanship. Books required.

---

This course contains no available sessions.
Click here to be notified about the next available session.

Gain an understanding of quality practices in service plumbing, including diagnosis and repair procedures for the most common service calls. You will also review concepts and practices essential for a competitive, successful plumbing business. Book required.

---

November 3, 2026 to December 10, 2026, 06:00pm - 10:00pm, Plumbing Room (128)

Through hands-on experiences, develop the necessary skills to craft staircases, cabinetry, and countertops that are safe, stylish, and functional in every space. Book required.

---

This course contains no available sessions.
Click here to be notified about the next available session.

Identify how to read and interpret construction drawings. Explore how to size water supply systems, principles and hazards of backflow, and design, installation, and troubleshooting booster and recirculating systems.

---

September 22, 2026 to October 27, 2026, 06:00pm - 10:00pm, Plumbing Room (128)